Search results for "co-axial":

Watch bracelet removal and installation tool, perfect for removing or installing your original watch bracelet, which likely does not include quick-release springbars. Many modern watches have tight tolerances, and removing or installing bracelets is challenging with standard springbar tools. This tool makes it easy to compress both sides of the springbar simultaneously, allowing the bracelet to slide out more easily. The tool is also spring-loaded to make lining it up easier. To reinstall, compress the springbars using the flat ends of the tool, and slide the bracelet back into the case. Includes a 1.0mm and 1.2mm tips, a screwdriver for swapping, and a padded carrying case. Featuring a printed measurement scale for precise alignment without scratching your lugs. Includes:-Premium bracelet tool-1.0mm tips for removing most springbars-1.2mm tips for removing larger springbars-Screwdriver for changing tips-Carrying case Minimum opening: 15mm Maximum opening: 27mm

FKM rubber two-piece watch strap with quick release springbars. Available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm lug widths. Two floating keepers secure the tail end of the strap. Small ridges on the side of the strap help to secure them. Thirteen adjustment holes mean that these straps should fit well on any size wrist. The underside of the strap features a waffle pattern, and a number of holes allow for venting of the wrist. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Genuine FKM rubber two piece watch strap with quick release springbars. Available in 20mm, 22mm, and 24mm lug widths. Two floating keepers.  Nine adjustment holes mean that these straps should fit well on wrists of any size. Available with silver or black PVD buckles. These straps fit wrists from about 6.25 to 8.25 inches. If your wrist size is 8 inches or larger, we reccommend the Extra Long Ridge Rubber strap. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release springbars allow you to swap straps in seconds without tools quickly. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

StrapHabit Hook and Loop Single Pass straps use a quick-change pass-through design. The soft yet durable nylon features a ribbed design and is secured with a hook-and-loop closure. This passes through the brushed stainless-steel hardware with a subtly engraved StrapHabit logo. They will fit wrists from about 5.75 to about 8.25 inches. These straps are designed to fit watches with traditional spring bars, or fixed lug bars such as the Tudor Pelagos FXD.

Please read the fitment/specs information before purchasing Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp! The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism. Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close. These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes: Juiblee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).

Sailcloth Watch Strap with Captured Tail Deployant Buckle Sailcloth style two-piece watch strap with quick-release springbars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is recycled PET woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that touches your wrist is comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. A brushed silver deployant buckle is included with each strap. Nine tightly-spaced adjustment holes mean these straps will fit well on any wrist around 5.75 to 8.25 inches, and can be finely adjusted to get the perfect fit. Our StrapHabit sailcloth straps are extremely durable, and look fantastic! The quick-release springbars allow you to quickly swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes with the buckle close to the center of your wrist. Also includes a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

One of our most popular straps is now available for extra-large wrists! These will fit wrists from about 7.25 inches to 10.25 inches. Genuine FKM rubber two-piece watch strap with quick-release spring bars. Two floating keepers.  Fourteen adjustment holes mean that these straps should fit well on wrists of any size. If your wrist size is less than 8 inches, please check out the standard Ridge Rubber straps. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release springbars allow you to swap straps in seconds without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance.

StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance. Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting

Replace the tips for your StrapHabit Premium Bracelet Tool, or have a spare set. Includes a pair of 1.0mm and 1.2mm tips, and a screwdriver to install them on your bracelet tool. The 1.0mm tip handles most standard watch bracelets, while the 1.2mm tip fits bracelets with wider pin holes. Both tips are stainless steel and designed to match the durability of the original tool. If your tips have dulled or bent from regular use, swapping them out takes less than a minute with the included screwdriver.

StrapHabit has teamed up with Divecore to bring you your favorite professional dive strap to StrapHabit's loyal customers! These use Divecore's upgraded HP design, with a StrapHabit-branded buckle and packaging. Divecore straps are not eligible for B4G1. The Divecore HP is the premium and heavily upgraded version of the original Vortex diving watch strap. These straps are 80/127mm long, 4mm thick, and have a 2mm taper from springbar to buckle. It features curved edges, added vented holes, and refinement of the signature Mono-accordion design for flexibility. Includes Divecore's proprietary 2.5mm thick quick-release spring-bars with a standard size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps. Divecore's signature mono-accordion design for flexibility while avoiding obstruction of the keeper for a perfect fit. Flat pin buckle and flat holes maximize micro adjustments. A locking feature prevents the strap from opening under dynamic pressure. For another Divecore option, check out the WFL strap. Yellow straps are part of Divecore's collaboration with Deepsea EDC, featuring a unique yellow color inspired by the iconic KM37 diving helmets. This collaboration also supports Project Recover, a nonprofit organization dedicated to locating and repatriating American service members missing in action since World War II. For each yellow strap sold, 5% of proceeds will be donated to Project Recover to support its mission of bringing closure and recognition to families and the nation. These straps feature the EDC logo buckle and special packaging. Olive straps are part of the Divecore × Sketchy Boyz HP collaboration. This strap celebrates the ethos of Sketchy Boyz Watch Club — a multi-national community of military, law enforcement, and professional end-users who share their knowledge, experience, and passion for horology. Their mission is to provide honest, experience-based insight and create a space where end-users and enthusiasts alike can connect. These straps feature the Sketchy Boyz logo buckle and special packaging. These use Divecore's upgraded American FKM rubber formula. The scientific name of FKM is Fluoro-Elastomer. It is an extremely hard-wearing rubber compound highly resistant to salt water, aggressive chemicals, and extreme temperatures (as low as -45C and high as +300C). It is the perfect choice for a high-end rubber watch strap designed to fit the toughest watches and withstand the harshest environments.

Sailcloth nylon two-piece watch strap with quick-release spring bars. One fixed and one floating keeper. These feature soft sailcloth fabric, leather reinforcement at the holes, and buckles with polished and brushed finishing Our StrapHabit sailcloth straps are extremely durable and look fantastic! The quick-release spring bars allow you to swap straps in seconds without tools. Includes a short (115mm) and long (125mm) tail strap. The outer material is nylon sailcloth. It is softer than canvas and has a slight shine. The material is strong but softens to fit your wrist after a short time. The inner lining that touches your wrist is comfortable, black synthetic leather. Breakfast Blue: This vibrant blue color is the perfect pairing for a brunch with friends.Lilacking: Despite its name, this colorway is not lacking in style, comfort, or durability!PSL (Pumpkin Strap Love): Fall is here! Pick up the perfect strap to wear while apple picking or carving a turkey.Stay Classy Burgundy: This strap smells of rich mahogany. Okay, not really, but it is leather-bound, and it's kind of a big deal. People know it!Panda: Like your favorite vintage chronograph, white with black inserts.Reverse Panda: We think you get it.pH Green: Porsche has Acid Green, but ours is a little more basic.Mars Red: The color of the fourth planet (and our favorite mission of the Moonswatch).I.M.E. Camo: "It Matches Everything." This camo has so many colors in it that it has to match some part of your watch.