Holiday Gift Guide

Stainless steel adaptors that let you install any standard 22mm or 24mm watch strap on your 44mm, 45mm, 46mm, or 49mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set. Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width. Strap not included — can be added with purchase.

Stainless steel adaptors that let you install any standard 20mm and 22mm watch strap on your 38mm, 40mm, 41mm, or 42mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set. Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width. Strap not included — can be added with purchase.

Nylon webbing combined with comfortably stretch elastic and a hook and loop closure. The length of the hook and loop side is 130mm when fully extended. When folded, it can adjust from about 78 to 95mm. The buckle side also includes three pieces in 15mm increments. Fits wrists from about 5.75 to about 8.25 inches.

Strap Removal Tool for Blancpain x Swatch Scuba Fifty Fathoms Change the strap on your Blancpain x Swatch Scuba Fifty Fathoms with this StrapHabit hex screwdriver kit. Removes the strap bars on the Antarctic, Arctic, Indian, Atlantic, Pacific, and Ocean of Storms. Why you need it. Swatch installs the NATO straps on the Blancpain x Swatch Scuba Fifty Fathoms using screws rather than spring bars. Pass-through straps like our Elastic Straps or Adjustable Straps are easy and quick to swap in without any tools. For two-piece straps, two special hex drivers are required to remove the screw bars. StrapHabit has your back with a set of two gold anodized screwdrivers built exactly for this. What's included. A set of two gold anodized hex screwdrivers, CNC machined with spinning caps on the end to make them easy to hold and spin with one in each hand. Once the screw bars are removed, a two-piece strap can be installed. The lug width is 21.7mm so most 22mm rubber straps will fit. If your strap includes built-in quick-release spring bars (as StrapHabit straps do), the spring bars must first be removed. This is easy on our rubber straps by carefully stretching the rubber. On other straps, it requires cutting the spring bar and is more difficult. Pair with any StrapHabit two-piece rubber strap for the easiest swap.

Stainless steel Jubilee bracelet with alternating brushed and polished links. Available in 20mm, 21mm, and 22mm. The thin, rounded link design sits comfortably on the wrist and pairs well with dive watches, chronographs, and many modern cases. Removable links for sizing. Deployant clasp with a safety latch and dual push buttons. Each bracelet includes two quick-release spring bars in the correct diameter for your width, so there's no guesswork on fitment.

StrapHabit has teamed up with our local friends at Esoteric Car Care to provide a complete crystal protection kit for your watch. The kit includes 8mil thick automotive-grade Xpel film precision cut to fit your watch crystal, plus everything needed to easily install it. Esoteric is the premier source for automotive detailing. As experts in paint protection film, they have chosen Xpel as the preferred PPF. Its superior protection will keep your favorite watch crystal scratch-free. Moonswatch film is 28.6mm diameter8mil thickness = 0.008 inches (0.2mm) If your Moonswatch or Speedmaster also needs a better strap, you can find those here. Due to its popularity and easily-scratched plastic crystal, we're initially offering this kit for the Swatch x Omega Moonswatch and Omega Speedmaster Professional Moonwatch. If you'd like to see a kit for another watch, please let us know.

Genuine rubber two-piece watch strap with quick-release springbars. Two keepers, one with notches to hold it in place. Nine adjustment holes mean that these straps should fit well on any size wrist. Available with silver, or black PVD buckles. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

UPDATE: If your size is sold out, please see the Rubber MWP straps Brodinkee and StrapHabit are back for 2025 with our best collaboration yet! StrapHabit has already donated over $50,000 to the American Cancer Society since 2022 through the sales of Men Wear Pink watch straps. Update! We raised an additional $25,000 in 2025! Show your support for a friend or loved one who has battled cancer right on your wrist! StrapHabit will donate the total purchase cost ($49) for each strap sold to the fundraiser. Because the full purchase price is donated to charity, discounts and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. These straps feature the same design as our best-selling Deployant Sailcloth, but are now available in our brightest pink color yet! Black stitching helps to accentuate the design, and a StrapHabit/Brodinkee logo is discreetly hidden on the inside of the clasp. A brushed silver deployant buckle is included with each strap. Black is available as an add-on item. Sailcloth-style two-piece watch strap with quick-release spring bars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is made from recycled PET and woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that comes into contact with your wrist is made of comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. Nine tightly spaced adjustment holes mean these straps will fit nicely on any wrist measuring 5.75 to 8.25 inches, and can be finely adjusted to achieve the perfect fit. The quick-release springbars allow you to swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes, with the buckle close to the center of your wrist. Also consists of a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

StrapHabit screwdriver to replace tips on the Premium Bracelet Tool The end swivels, making it quick and easy to use.  These are also great for repairing eyeglasses.

StrapHabit spring-loaded deployant to fit your CTS strap.  Strong leaf springs keep the buckle secure on your wrist, but make it easy to open and close without fiddling with buttons that can be hard to close or accidentally pop open. This design also makes the deployant thinner and more comfortable than typical deployants. Each side features two micro-adjust holes to ensure a perfect fit (four total). A hidden StrapHabit logo is laser-engraved inside the buckle. 16mm fits 18, 19, and 20mm StrapHabit CTS straps18mm fits 21 and 22mm StrapHabit CTS straps 8mm thick when folded

StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance. Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting

Why did I make these? Because it's fun! Choose a lapel pin styled after one of my favorite watches. Can't decide? Get a 4 pack! Pin them to your backpack, hat, watch case, or anywhere you want to show you're a watch lover. Each pin features a gloss-coated offset printing in bright colors. They are solid metal, with a metal butterfly/military clutch securing the back.

StrapHabit measuring tape for measuring your wrist size. Helpful for sizing straps and bracelets, or determining watch fit.   Sized for StrapHabit cut-to-size (CTS) Deployant Straps.   Fits wrists up to 25cm (9.8 inches).

StrapHabit Hook and Loop Single Pass straps use a quick-change pass-through design. The soft yet durable nylon features a ribbed design and is secured with a hook-and-loop closure. This passes through the brushed stainless-steel hardware with a subtly engraved StrapHabit logo. They will fit wrists from about 5.75 to about 8.25 inches. These straps are designed to fit watches with traditional spring bars, or fixed lug bars such as the Tudor Pelagos FXD.

StrapHabit watch screwdriver kit, including six screwdrivers and six extra tips. While most of our straps do not require tools to install or remove, these screwdrivers can be used to install your StrapHabit Deployant buckle. Additionally, you can use them to resize your original bracelet if the links are secured with screws. The colored, anodized ends of the screwdrivers swivel, making them quick and easy to use. These are also great for repairing eyeglasses. Press/Click specifications tab to see size information.

People have been loving the Divecore HP Professional straps, so we were excited to work with Divecore to bring you its latest strap, the WFL (Waffle) Professional. The WFL Strap is a purpose-built diving strap that blends the vintage character of a traditional waffle design with the technical upgrades and proven ergonomics of the HP model. The WFL retains all the essential features of the original while adopting a waffle-style structure for a more classic aesthetic. Divecore straps are not eligible for B4G1. These straps are 80/127mm long, 4mm thick, and have a 2mm taper from springbar to buckle. It features curved edges, added vented holes, and refinement of the signature Mono-accordion design for flexibility. Includes Divecore's proprietary 2.5mm thick quick-release spring-bars with a standard size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps. Circular holes and a pin buckle for classic waffle aesthetics. A locking feature prevents the strap from opening under dynamic pressure. Stainless steel hardware. These are made from Divecore's upgraded HNBR compound. Hydrogenated Nitrile-Butadiene Rubber (HNBR). HNBR is widely used in aerospace and automotive sealing applications due to its exceptional resistance to salt water, wet heat, and oil, as well as its superior tensile strength and wear resistance. Unlike conventional nitrile, HNBR is hydrogenated to stabilize the molecular structure, giving it outstanding durability, flexibility, and long-term resilience even in harsh marine environments.