All Straps

Curved spring bars with 0.8mm tips that are 1.5mm thick in the center. These provide more clearance to the case on watches with tight lug spacing. Standard spring bars sit straight across between the lugs, which can make strap changes difficult on watches where the lug openings sit close to the case. Curved spring bars arch away from the case, creating the extra room needed to slide a strap in and out without scratching or forcing it. These are a common need on watches with short lugs or factory-curved spring bars, such as Ming and similar models where the lugs curve inward toward the case back. Each set includes 2 spring bars. Available in 20mm, 22mm, and 24mm. We recommend pairing these with StrapHabit straps that have thinner edges for maximum clearance, including Ridge, Smooth, Vented, Slim Ridge, and Deployant Rubber straps. They also work well with single-pass styles like Elastic, Seatbelt, and FKM Rubber Pass Through straps.

Strap Removal Tool for Blancpain x Swatch Scuba Fifty Fathoms Change the strap on your Blancpain x Swatch Scuba Fifty Fathoms with this StrapHabit hex screwdriver kit. Removes the strap bars on the Antarctic, Arctic, Indian, Atlantic, Pacific, and Ocean of Storms. Why you need it. Swatch installs the NATO straps on the Blancpain x Swatch Scuba Fifty Fathoms using screws rather than spring bars. Pass-through straps like our Elastic Straps or Adjustable Straps are easy and quick to swap in without any tools. For two-piece straps, two special hex drivers are required to remove the screw bars. StrapHabit has your back with a set of two gold anodized screwdrivers built exactly for this. What's included. A set of two gold anodized hex screwdrivers, CNC machined with spinning caps on the end to make them easy to hold and spin with one in each hand. Once the screw bars are removed, a two-piece strap can be installed. The lug width is 21.7mm so most 22mm rubber straps will fit. If your strap includes built-in quick-release spring bars (as StrapHabit straps do), the spring bars must first be removed. This is easy on our rubber straps by carefully stretching the rubber. On other straps, it requires cutting the spring bar and is more difficult. Pair with any StrapHabit two-piece rubber strap for the easiest swap.

StrapHabit and STANDARD H first crossed paths at Windup NY in 2022. Wesley threw out the idea of collaborating on a watch strap, but neither of us had just the right idea. We've regularly kept in touch ever since then and Nick was even a guest on The STANDARD H Podcast. Wesley recently started the Instagram page @taupestrapclub, and we decided that color would be perfect for collaboration! Now we've added a versatile black option as well. STANDARD H describes its apparel as "elevated basics." With that in mind, we developed an elevated basic watch strap. What better than a simple and durable military-style pass-through? To signify the meeting of both brands, a subtle "SH" is laser engraved on the buckle. A small batch of 20mm straps sold out in one day on the STANDARD H website (and was even featured on Hodinkee). We decided to produce another run in 20mm and 22mm, and offer them on both sites.

Occasionally people misplace the pins for their StrapHabit Spring-Loaded Deployant Buckles. Purchase a replacement here. Only the pins are included. To purchase a buckle, please visit the link above. Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.  

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit Leather and FKM Rubber Quick Release Hybrid Watch Straps combine the best elements of two of our most popular styles of watch straps. They feature the high-end appearance of our leather straps combined with the numerous benefits of our FKM rubber straps. The leather is genuine calfskin, which is soft to the touch, and high-end in appearance. It also has an Epsom pattern embossed, similar to our standard leather straps. The inner FKM surface features channels to cool the wrist, and attractive StrapHabit branding molded in. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. The inner lining is genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. If you're looking for a bracelet option, check out our TQ18 Bracelets!

Do you have a watch lover in your life, but don't know what to give them as a gift? Maybe they love our watch bands, but you don't know what sizes or colors they need. A StrapHabit gift card is the perfect gift! Available in multiple denominations, they are the perfect gift. Once you complete your order, you or the recipient will receive an email with the unique gift card code. The recipient can then use that code at checkout to redeem it.

UPDATE: If your size is sold out, please see the Rubber MWP straps Brodinkee and StrapHabit are back for 2025 with our best collaboration yet! StrapHabit has already donated over $50,000 to the American Cancer Society since 2022 through the sales of Men Wear Pink watch straps. Update! We raised an additional $25,000 in 2025! Show your support for a friend or loved one who has battled cancer right on your wrist! StrapHabit will donate the total purchase cost ($49) for each strap sold to the fundraiser. Because the full purchase price is donated to charity, discounts and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. These straps feature the same design as our best-selling Deployant Sailcloth, but are now available in our brightest pink color yet! Black stitching helps to accentuate the design, and a StrapHabit/Brodinkee logo is discreetly hidden on the inside of the clasp. A brushed silver deployant buckle is included with each strap. Black is available as an add-on item. Sailcloth-style two-piece watch strap with quick-release spring bars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is made from recycled PET and woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that comes into contact with your wrist is made of comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. Nine tightly spaced adjustment holes mean these straps will fit nicely on any wrist measuring 5.75 to 8.25 inches, and can be finely adjusted to achieve the perfect fit. The quick-release springbars allow you to swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes, with the buckle close to the center of your wrist. Also consists of a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

People have been loving the Divecore HP Professional straps, so we were excited to work with Divecore to bring you its latest strap, the WFL (Waffle) Professional. The WFL Strap is a purpose-built diving strap that blends the vintage character of a traditional waffle design with the technical upgrades and proven ergonomics of the HP model. The WFL retains all the essential features of the original while adopting a waffle-style structure for a more classic aesthetic. Divecore straps are not eligible for B4G1. These straps are 80/127mm long, 4mm thick, and have a 2mm taper from springbar to buckle. It features curved edges, added vented holes, and refinement of the signature Mono-accordion design for flexibility. Includes Divecore's proprietary 2.5mm thick quick-release spring-bars with a standard size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps. Circular holes and a pin buckle for classic waffle aesthetics. A locking feature prevents the strap from opening under dynamic pressure. Stainless steel hardware. These are made from Divecore's upgraded HNBR compound. Hydrogenated Nitrile-Butadiene Rubber (HNBR). HNBR is widely used in aerospace and automotive sealing applications due to its exceptional resistance to salt water, wet heat, and oil, as well as its superior tensile strength and wear resistance. Unlike conventional nitrile, HNBR is hydrogenated to stabilize the molecular structure, giving it outstanding durability, flexibility, and long-term resilience even in harsh marine environments.