Find anything you need
Item added to cart!
%title%
%variant%
You have %itemCount% in your cart.Total being %total%
Premium Watch Bracelet Removal and Installation Tool
£68.00
Watch bracelet removal and installation tool, perfect for removing or installing your original watch bracelet, which likely does not include quick-release springbars.
Many modern watches have tight tolerances, and removing or installing bracelets is challenging with standard springbar tools. This tool makes it easy to compress both sides of the springbar simultaneously, allowing the bracelet to slide out more easily. The tool is also spring-loaded to make lining it up easier.
To reinstall, compress the springbars using the flat ends of the tool, and slide the bracelet back into the case.
Includes a 1.0mm and 1.2mm tips, a screwdriver for swapping, and a padded carrying case.
Featuring a printed measurement scale for precise alignment without scratching your lugs.
Includes:-Premium bracelet tool-1.0mm tips for removing most springbars-1.2mm tips for removing larger springbars-Screwdriver for changing tips-Carrying case
Minimum opening: 15mm
Maximum opening: 27mm
StrapHabit Watch Collector Pins
from £4.00
Why did I make these? Because it's fun! Choose a lapel pin styled after one of my favorite watches. Can't decide? Get a 4 pack!
Pin them to your backpack, hat, watch case, or anywhere you want to show you're a watch lover.
Each pin features a gloss-coated offset printing in bright colors. They are solid metal, with a metal butterfly/military clutch securing the back.
Wrist Measuring Tapes
£2.00
StrapHabit measuring tape for measuring your wrist size. Helpful for sizing straps and bracelets, or determining watch fit.
Perfect for sizing StrapHabit cut-to-size (CTS) deployant straps.
Fits wrists up to 25cm (9.8 inches).
Spring-Loaded Deployant Buckles For CTS Straps
from £22.00
StrapHabit spring-loaded deployant to fit your CTS strap.
Strong leaf springs keep the buckle secure on your wrist, but make it easy to open and close without fiddling with buttons that can be hard to close or accidentally pop open. This design also makes the deployant thinner and more comfortable than typical deployants.
Each side features two micro-adjust holes to ensure a perfect fit (four total). A hidden StrapHabit logo is laser-engraved inside the buckle.
16mm fits 18, 19, and 20mm StrapHabit CTS straps18mm fits 21 and 22mm StrapHabit CTS straps
8mm thick when folded
Titanium Watch Buckles
£12.00
Replacement titanium watch buckles made from grade 2 titanium with a matte finish. Titanium is significantly lighter than stainless steel, corrosion resistant, and hypoallergenic.
Buckles with 2mm tangs fit:-Tropical Rubber-Horween Leather-Premium Sailcloth-Waffle Rubber-Epsom Leather-Slim RidgeBuckles with 3mm tangs fit:-Ridge Rubber-Extra Long-Smooth Rubber-Rubber and Sailcloth Hybrid Straps-Vented Rubber-Locking KeeperPlease note that most straps have a taper; the buckle dimension must match the buckle end of the strap, not the side where it attaches to the watch.
Watch Travel Cases
from £15.00
StrapHabit Watch Travel Cases are the best way to keep your watch or straps safe while traveling!
Unlike other travel cases that require your watch to lie flat, these can hold any type of watch or bracelet. This means that watches with inflexible integrated straps will fit, and it eliminates the risk of scratching your caseback or creating a crease in your watch straps.
Also, unlike other solutions, these cases feature a hard-shell construction to protect your watch from compression while inside your backpack or luggage. Removable foam ensures a perfect fit for both small and large watches.
A soft lining keeps your watch's finish safe and secure inside the travel case, and the zipper is mounted on the exterior of the hard shell, so it can't contact your watch.
A StrapHabit zipper logo pull completes the look, ensuring your watches look great even when in storage.
Be sure to pick up an extra one to store your watch straps while traveling, making it easy to prepare for any event!
Watch Lover Starter Kit Bundle
£39.00
£43.00
Everything you need to swap straps, resize bracelets, and take care of your watch — bundled together at a better price than buying each piece separately.
The spring bar removal tool handles quick strap changes. The bracelet link remover lets you size stainless steel bracelets at home without a jeweler. The mini screwdriver kit covers smaller adjustments and clasp screws. The UV lume charging flashlight is built for charging up your watch dial before nighttime or creating dramatic lume shots for photos. A watch travel case keeps everything protected on the go.
A solid gift for any watch collector or a great way to build out your own toolkit in one purchase.
Premium Spring Bar Removal Tool for Watch Strap Changing
£13.00
StrapHabit Premium Spring Bar Tool for changing watch straps and bands.
Compared to your standard Spring Bar Tool, this Premium features the following upgrades:
-Longer body with knurled surface for easier grip while removing difficult spring bars-Locking collars to secure tips from loosening-Two sizes of forks for removing straps with more clearance, and tight fit bracelets-Reversible tip with a small pin
The standard tool is a lower cost option recommended for occasional strap swaps, while this premium tool is an easier to use option for those who swap straps and bracelets frequently.
While most StrapHabit straps have quick-release spring bars, a tool is typically required to remove or install your old watch strap/bracelet and a few of our straps.
The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs.
StrapHabit branding is laser etched in the tool.
Watch Lover Pro Kit Bundle
£105.00
£117.00
The premium spring bar removal tool handles quick strap changes. The premium bracelet removal and installation tool makes adding and removing metal bracelets clean and scratch-free. The bracelet link remover lets you size stainless steel bracelets at home without a jeweler. The mini screwdriver kit covers smaller adjustments and clasp screws. The UV lume charging flashlight is built for charging up your watch dial before nighttime or creating dramatic lume shots for photos. A watch travel case keeps everything protected on the go.
The complete toolkit for any watch enthusiast — or a great gift for someone who takes their watches seriously.
Tool-Less Quick Adjust Bracelet Clasps
from £25.00
Please read the fitment/specs information before purchasing
Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp!
The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism.
Twin trigger buttons keep the clasp securely in place.
These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes:
Juiblee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp
Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).
Spring-Loaded Deployant Buckles
from £22.00
Please read the fitment information on the Specifications tab before purchasing.
StrapHabit spring-loaded deployant buckles are the perfect upgrade to your StrapHabit or other straps.
Strong leaf springs keep the buckle secure while it's on your wrist, but make it easy to open and close without fiddling with buttons that can be difficult to close, or pop open by accident.
This design also makes the deployant thinner and more comfortable than typical deployants.
It also reduces wear and tear on the holes of your factory strap.
A StrapHabit logo is laser-engraved on the buckle.
Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.
If you've misplaced a pin and need replacements, they can be purchased here.
Single-Fold Deployant Buckles
£13.00
Please read the fitment/specs information before purchasing -->
StrapHabit single-fold deployant buckles are the perfect upgrade to your StrapHabit or other straps.
Twin trigger buttons keep them secure.
This design also makes the deployant thinner and more comfortable than typical deployants.
It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle.
Slidecatch Titanium EDC Watch Repair Multi-Tool
£68.00
StrapHabit brings you the Imperial Watch Co. Slidecatch tool. This tool is so useful and just plain cool that we had to offer it on the StrapHabit site.
The Slidecatch is the first Titanium Everyday Carry (EDC) tool to feature custom precision bit watch tools! It is perfect for doers, makers, builders, and yes, even watch enthusiasts. The Slidecatch combines the elements of a portable screwdriver with the sleekness and fun of a retractable blade! Stunningly slim, portable, and just downright a blast to use. Utilitarian at its core, this all-Titanium tool accepts standard 4mm hex bits so you can carry exactly what you need, when you need it. Whether you’re looking for a pocket-ready tool for tuning your camera gear, adjusting the brakes on your mountain bike, or a spring bar tool for swapping out watch bands, the Slidecatch has you covered!
This model features a grey all-Titanium body that epitomizes form meets function. From a visually striking appearance to its ergonomic size and top-of-the-line materials, the Slidecatch is one tool you’ll never want to leave home without.
Apple Watch Strap Adaptors for 38mm, 40mm, 41mm, 42mm
from £7.00
Stainless steel adaptors that let you install any standard 20mm and 22mm watch strap on your 38mm, 40mm, 41mm, or 42mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set.
Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width.
Strap not included — can be added with purchase.
Apple Watch Strap Adaptors for 44mm, 45mm, 46mm, 49mm
from £7.00
Stainless steel adaptors that let you install any standard 22mm or 24mm watch strap on your 44mm, 45mm, 46mm, or 49mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set.
Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width.
Strap not included — can be added with purchase.
Lume Charging UV LED Flashlight
£11.00
UV LED flashlight for charging watch lume. Quickly charge the lume on your watch for photos or to check out lume at watch gatherings.
Pocket-sized with a built-in rechargeable battery. USB charging cable included. The light emitted has a purple hue.
Thin Spring Bars for Seiko and Citizen Fat Lug Holes
£7.00
Spring bars with 1.1mm tips that are 1.8mm thick in the center, allowing fat tip spring bars to be installed in standard straps.
Includes 2 spring bars.
While all of our straps fit safely and securely on Seiko and Citizen watches with fat lug holes such as Prospex and Promaster models, some customers don't prefer the slight wiggle that is present when installing them on Seiko and Citizen Prospex and Promaster divers. The quick-release spring bars standard in our straps feature 0.8mm tips, while Seiko and Citizen divers spring bars use 1.1mm tips.
Most fat spring bars can't be installed in standard straps, as they are too thick to fit.
This is why we've developed a new spring bar! It has 1.1mm tips but is 1.8mm at the center. This allows it to be installed in StrapHabit straps and Stainless Steel bracelets, as well as any of your other favorite straps.
These will work with any of our straps, but some of them will require breaking the tip off the QR spring bar.
We recommend using with the following rubber straps as they are the easiest to install:
-Ridge Rubber-Extra Long Ridge Rubber-Tropical Rubber-Smooth Rubber-Vented Rubber-Waffle Rubber-Slim Ridge Rubber-Deployant Rubber-Elastic-Seatbelt-STANDARD H-FKM Rubber Pass Through-Beads of Rice Bracelets-Jubilee Bracelets
Spring Bar Removal Tool for Watch Strap Changing
£7.00
Spring bar removal tool for changing watch straps and bands.
Most StrapHabit straps have quick-release spring bars, but a tool is typically required to remove your original watch strap or bracelet and a few of our styles that use standard spring bars.
Dual-tip design with a fork end and a pin end. The fork removes standard spring bars from between the lugs. The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs.
Built-in ruler in centimeters and millimeters for measuring lug width or strap size. StrapHabit branding is laser etched into the tool.
Divecore x StrapHabit HP Black DLC Buckles
£7.00
Upgrade your HP strap with our Black DLC (Diamond-Like Carbon) Buckle, built for rugged performance and a stealth aesthetic that pairs perfectly with your dive watch.
Crafted from high-grade stainless steel and finished with a black DLC coating, this buckle offers exceptional scratch resistance, corrosion protection, and a deep matte finish that won’t fade over time.
Compatible with our HP series. 18mm buckles fit 20mm Divecore HP straps. 20mm buckles fit 22mm Divecore HP straps.
Features:
Black Diamond-Like Carbon (DLC) coating
Scratch-resistant and corrosion-resistant finish
Brushed matte texture for a stealthy, tactical look
Solid stainless steel construction
Spare Tips for Premium Bracelet Tool
from £11.00
Replace the tips for your StrapHabit Premium Bracelet Tool, or have a spare set.
Includes a pair of 1.0mm and 1.2mm tips, and a screwdriver to install them on your bracelet tool. The 1.0mm tip handles most standard watch bracelets, while the 1.2mm tip fits bracelets with wider pin holes. Both tips are stainless steel and designed to match the durability of the original tool.
If your tips have dulled or bent from regular use, swapping them out takes less than a minute with the included screwdriver.
Let customers speak for us
Find the watch strap tools and accessories you need to keep your watch collection looking sharp. Swap your watch straps with ease with our spring bar removal tool or resize your watch bracelets for your comfort with our bracelet link removal tool.
We have travel cases, a variety of watch buckles as well as a LED flashlight to recharge the lumes on your watch and watch straps.
