Best Sellers

Genuine rubber two-piece watch strap with quick-release springbars. Two keepers, one with notches to hold it in place. Nine adjustment holes mean that these straps should fit well on any size wrist. Available with silver, or black PVD buckles. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Hybrid two-piece watch strap with a woven sailcloth top and FKM rubber underside. The sailcloth gives it a textured, refined look. The FKM rubber lining makes it waterproof, sweat-resistant, and resistant to fuzz, cracking, and odor. Available in 20mm and 22mm with silver or black PVD buckles. Quick-release spring bars for tool-free strap changes in seconds. Two keepers hold the end of the strap securely in place. Thirteen adjustment holes to fit a wide range of wrist sizes. The FKM rubber lining feels nearly as soft and flexible as silicone but is much stronger. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical resistance, and heat resistance. Anti-allergenic and scent-free.

Cut-To-Size Smooth FKM Deployant Straps StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance. Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting

Nylon Pass-Through Charity Watch Strap for Cancer Research  By now, many of you know that a few months after the inception of StrapHabit, I learned that I had testicular cancer. Although I was very lucky that it was caught early, that experience shifted the way that I look at life and what I value most. Although it was a difficult time, it taught me that sharing my story with others is a powerful tool for raising awareness and money to help others. Unfortunately, in the years since then, I've seen more and more loved ones experience their own battles with cancer. In an effort to leverage the brand's reach to support those facing their own battles, StrapHabit has partnered with friends to support several charities. I've sold a lot of straps and raised a lot of money (around $75,000 as of mid 2026), but I haven't put any of my own sweat into it. I had a few local customers in Columbus, Ohio, call me out for not participating in Pelotonia, a massive annual bike ride that raises money for cancer research. When the ride added a mountain bike portion this year, I officially ran out of excuses. Mountain biking is my favorite sport, so I felt that I had to do it. My son's mountain bike group put together a team for parents, so I even have a great group of partners to practice with. As a result, on October 3rd, I'll be riding 24 trail miles, a distance I haven't ridden in years. I've been more focused on fitness since I started doing StrapHabit full-time, so I'm sure I can do it! And of course I'll be wearing one of these straps. For each strap sold, StrapHabit will donate $35 to Pelotonia. 100% of funds donated to Pelotonia go directly to innovative cancer research at the OSUCCC James Cancer Treatment and Research Center. -NickFounder, StrapHabit The strap is a nylon pass-through strap with amazing graphics designed by Matt Smith-Johnson (a.k.a. Teenage Grandpa).  It features a repeating pattern of the Pelotonia logo, creating a camouflage appearance. The logo is also reminiscent of a field watch arrow, but turned on its side. The Pelotonia name is hidden on the inside of the strap, and the buckle features subtle StrapHabit engraving. This is the same premium pass-through nylon strap we use in some of your other favorite StrapHabit collaborations, now featuring the Pelotonia arrow in a repeating, camouflage pattern. Discounts and sales do not apply to these charity straps, and they are excluded from B4G1. StrapHabit will donate $35 from each strap sold to Pelotonia. If you prefer to support my campaign directly, please visit https://my.pelotonia.org/profile/NL1335716.  If you select a 2-Pack, you will receive a 20mm and 22mm strap with silver hardware, plus a free Pelotonia sticker pack. The sticker packs are also available for purchase separately, with the proceeds also being donated.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts. They include free quick-release spring bars for easy, tool-free strap changes.

Nylon Pass-Through Charity Watch Strap for Cancer Research StrapHabit has teamed up with RTCC again in 2026. This year, we have a nylon pass-through strap with amazing graphics designed by Matt Smith-Johnson (a.k.a. Teenage Grandpa). StrapHabit will donate $30 from each strap sold to the Worn and Wound team members for the bike ride. This is the same premium pass-through nylon strap we use in some of your other favorite StrapHabit collaborations, now featuring the team's Can't Stop, Won't Stop cycling kit graphics. It uses light blue nylon with hot pink accents and the rally cry printed boldly across the back. Purple keepers and a black PVD buckle round it out. It's lightweight, comfortable, and ready for whatever — a long ride, a long workday, or just a long week. Discounts and sales do not apply to these charity straps, and they are excluded from B4G1. If you select a 2-Pack, you will receive a 20mm and a 22mm strap. If you prefer to support the charity directly, please make a donation here.

Twin-Trigger Deployment Clasp for Leather and Rubber Straps StrapHabit single-fold deployant buckles are an easy upgrade to your StrapHabit or other straps. Twin trigger buttons keep them secure. This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle. Please read the fitment/specs information before purchasing

Standard size spring bars with 0.8mm tips, 1.8mm thick in the center. These fit almost all watches with standard lugs in the width you select, available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm. Each pack includes two spring bars. If you have a Seiko that needs 1.1mm tips, use our Seiko spring bars instead. These also work with several StrapHabit straps, including Elastic, Seatbelt, Adjustable, Beads of Rice bracelets, and the Standard H x StrapHabit Pass-Through.

Our StrapHabit elastic watch straps are the most comfortable on the market! The elastic design securely holds the watch to your wrist but allows it to expand and contract as your wrist changes size with temperature throughout the day. The material is elastic marine nationale parachute style, but the straps have a traditional military style dual pass design. It has 3 keepers, one of which is floating. We find this design more comfortable, plus it allows the strap to be swapped without removing the spring bars. We also find them easier to take on and off and adjust to your wrist.

StrapHabit brings you watch straps crafted from Chromexcel leather sourced at the Chicago-based Horween tannery. Chromexcel is widely regarded as a top choice of leather for a watch strap. It offers supreme durability, yet feels exceptionally soft and supple to the touch, almost buttery-smooth. The straps are padded, but still quite flexible. These straps also deliver a character that improves with age. Chromexcel's vegetable tanning process uses a proprietary blend of oils and waxes to create a naturally water-resistant surface that develops a rich patina over time. The oils provide comfort while resisting cracking and premature wear, and also add a unique personality to your timepiece. The result is a "pull-up" effect that shifts colors as the strap is folded or flexed. Minor scratches can also be rubbed off thanks to this effect. A water-resistant leather lining is applied to keep the strap soft against your wrist. The Horween and StrapHabit logos are embossed, as is the strap size. A high-quality stainless steel buckle features a brushed finish and attractive grooves.

Essential Watch Toolkit with Spring Bar Tool, Bracelet Sizer, and Travel Case Everything you need to swap straps, resize bracelets, and take care of your watch — bundled together at a better price than buying each piece separately. The spring bar removal tool handles quick strap changes. The bracelet link remover lets you size stainless steel bracelets at home without a jeweler. The mini screwdriver kit covers smaller adjustments and clasp screws. The UV lume charging flashlight is built to charge your watch dial before nighttime or to create dramatic lume shots. A watch travel case keeps everything protected on the go. A solid gift for any watch collector or a great way to build out your own toolkit in one purchase.

Stainless steel Jubilee bracelet with alternating brushed and polished links. Available in 20mm, 21mm, and 22mm. The thin, rounded link design sits comfortably on the wrist and pairs well with dive watches, chronographs, and many modern cases. Removable links for sizing. Each bracelet includes two quick-release spring bars in the correct diameter for your width, so there's no guesswork on fitment. Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.

Spring bars with 1.1mm tips that are 1.8mm thick in the center, allowing fat tip spring bars to be installed in standard straps. Includes 2 spring bars. While all our straps fit safely and securely on Seiko and Citizen watches with fat lug holes, such as Prospex and Promaster models, some customers prefer not to have the slight wiggle when installing them on Seiko and Citizen Prospex and Promaster divers. The quick-release spring bars standard in our straps feature 0.8mm tips, while Seiko and Citizen divers' spring bars use 1.1mm tips. Most fat spring bars can't be installed in standard straps, as they are too thick to fit. This is why we've developed a new spring bar! It has 1.1mm tips but is 1.8mm at the center. This lets you install it in StrapHabit straps and Stainless Steel bracelets, as well as any of your other favorite straps. These will work with any of our straps, but some of them will require stretching the rubber or breaking the tip off the QR spring bar.

After raising over $10,000 for breast cancer in 2022 and over $20,000 in 2023, Bro and StrapHabit have teamed up to support the American Cancer Society again in 2024! This year we've based it on StrapHabit's favorite strap available, the FKM Deployant Rubber. We've taken that strap and rendered it in a 10th color. This year it's a shade of pink that is brighter and more saturated than last year. The Brodinkee x StrapHabit logo is hidden inside of the deployant.Show your support of a friend or loved one who has battled cancer right on your wrist! Donation Info:   At the end of breast cancer month (October), StrapHabit will donate the total purchase cost ($49) for each strap sold to Bro's fundraiser. Because the full purchase price is donated to charity, discounts, and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. Product info: FKM rubber two-piece deployant watch strap with quick-release springbars. Available in 19mm, 20mm, 21mm, and 22mm lug widths. The deployant design means that the tail end of the strap is captured and will not flop around. A polished buckle with twin triggers keeps your watch secure but is quick to take on and off. Twelve tightly-spaced adjustment holes mean these straps will fit well on any wrist around 6 to 8.25 inches, and can be finely adjusted to get the perfect fit. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also molded in the FKM rubber. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, and chemical and heat resistance.

Simple tool for removing links from your StrapHabit Stainless Steel Bracelet, or other watch bracelets with split pins, or pin and collar. Compared to our standard bracelet link tool, the Plus version features a height-adjustable platform, which makes it easier to line up the pin with your bracelet. It's also constructed from thicker metal and features a larger adjustment knob. Engraved with StrapHabit logos. Includes 3 spare pins.

StrapHabit Premium Spring Bar Tool for changing watch straps and bands. Compared to your standard Spring Bar Tool, this Premium features the following upgrades: -Longer body with knurled surface for easier grip while removing difficult spring bars-Locking collars to secure tips from loosening-Two sizes of forks for removing straps with more clearance, and tight fit bracelets-Reversible tip with a small pin The standard tool is a lower cost option recommended for occasional strap swaps, while this premium tool is an easier to use option for those who swap straps and bracelets frequently. While most StrapHabit straps have quick-release spring bars, a tool is typically required to remove or install your old watch strap/bracelet and a few of our straps.  The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs.  StrapHabit branding is laser etched in the tool.

UV LED flashlight for charging watch lume. Quickly charge the lume on your watch for photos or to check out lume at watch gatherings. Pocket-sized with a built-in rechargeable battery and included USB charging cable. Emits 365nm UV light for strong lume charging.

Rubber two-piece watch strap with quick-release spring bars and two keepers. Available in 20mm, and 22mm. Twelve adjustment holes mean that these straps should fit well on any size wrist. The vented design is perfect for keeping your wrist cool while working out or during hot weather. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release spring bars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance.

Replacement stainless steel watch buckles for straps with 18mm, 20mm and 22mm buckle width. Includes spring bars. Available in brushed silver, and black PVD. Standard buckles are the same as the ones that come with our original Sailcloth Quick Release straps. Standard 2 buckles are the same ones that come with our Waffle, Slim Ridge, Horween, and Epsom Style Leather Straps. Dive buckles are the same as the ones that come with most of our Rubber Quick Release straps. These are available with and without StrapHabit engraving. These fit Ridge, Smooth, Vented, Locking Keeper, and TQ18 straps. Premium buckles are the same as the ones that come with our Premium Sailcloth Quick Release straps. They include StrapHabit engraving. Pro Diver buckles are the same as the ones that come with our Pro Diver straps. They include StrapHabit engraving. Tropical buckles are the same as the ones that come with our Tropical Quick Release straps. They include StrapHabit engraving.

Leather two-piece watch strap with quick-release spring bars. A pebbled pattern is embossed on the leather, making the strap more durable and scratch-resistant. It also gives it an attractive appearance. The result is the look and durability benefits of French Epsom leather at a more affordable price. The leather features beautiful, saturated colors with a satin finish. These straps are not stiff or uncomfortable and quickly shape to your wrist. The inner lining that touches your wrist is comfortable and soft top-grain leather. Ivory white stitching provides an attractive contrast. One fixed and one floating keeper. Our StrapHabit leather straps are durable, and look fantastic! The quick-release spring bars allow you to swap straps in seconds without tools quickly.