Find anything you need
Item added to cart!
%title%
%variant%
You have %itemCount% in your cart.Total being %total%
Single-Fold Deployant Buckles
£13.00
Please read the fitment/specs information before purchasing -->
StrapHabit single-fold deployant buckles are the perfect upgrade to your StrapHabit or other straps.
Twin trigger buttons keep them secure.
This design also makes the deployant thinner and more comfortable than typical deployants.
It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle.
Tool-Less Quick Adjust Bracelet Clasps
from £26.00
Please read the fitment/specs information before purchasing
Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp!
The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism.
Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close.
These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes:
Juiblee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp
Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).
Spring-Loaded Deployant Buckles
£23.00
Please read the fitment information on the Specifications tab before purchasing.
StrapHabit spring-loaded deployant buckles are the perfect upgrade to your StrapHabit or other straps.
Strong leaf springs keep the buckle secure while it's on your wrist, but make it easy to open and close without fiddling with buttons that can be difficult to close, or pop open by accident.
This design also makes the deployant thinner and more comfortable than typical deployants.
It also reduces wear and tear on the holes of your factory strap.
A StrapHabit logo is laser-engraved on the buckle.
Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.
If you've misplaced a pin and need replacements, they can be purchased here.
Divecore x StrapHabit Black DLC Buckles
£7.00
Upgrade your Divecore HP or WFL strap with our Black DLC (Diamond-Like Carbon) Buckle, built for rugged performance and a stealth aesthetic that pairs perfectly with your dive watch.
Crafted from high-grade stainless steel and finished with a black DLC coating, this buckle offers exceptional scratch resistance, corrosion protection, and a deep matte finish that won’t fade over time.
18mm buckles fit 20mm Divecore straps. 20mm buckles fit 22mm Divecore straps.
Features:-Black Diamond-Like Carbon (DLC) coating-Scratch-resistant and corrosion-resistant finish-Brushed matte texture for a stealthy, tactical look-Solid stainless steel construction
Additional Steel Watch Buckles
£4.00
Replacement stainless steel watch buckles for straps with 18mm, 20mm and 22mm buckle width. Includes spring bars. Available in brushed silver, and black PVD.
Standard buckles are the same as the ones that come with our original Sailcloth Quick Release straps.
Standard 2 buckles are the same ones that come with our Waffle, Slim Ridge, Horween, and Epsom Style Leather Straps.
Dive buckles are the same as the ones that come with most of our Rubber Quick Release straps. These are available with and without StrapHabit engraving. These fit Ridge, Smooth, Vented, Locking Keeper, and TQ18 straps.
Premium buckles are the same as the ones that come with our Premium Sailcloth Quick Release straps. They include StrapHabit engraving.
Pro Diver buckles are the same as the ones that come with our Pro Diver straps. They include StrapHabit engraving.
Tropical buckles are the same as the ones that come with our Tropical Quick Release straps. They include StrapHabit engraving.
Titanium Watch Buckles
£12.00
Replacement titanium watch buckles made from grade 2 titanium with a matte finish. Titanium is significantly lighter than stainless steel, corrosion resistant, and hypoallergenic.
Buckles with 2mm tangs fit:-Tropical Rubber-Horween Leather-Premium Sailcloth-Waffle Rubber-Epsom Leather-Slim RidgeBuckles with 3mm tangs fit:-Ridge Rubber-Extra Long-Smooth Rubber-Rubber and Sailcloth Hybrid Straps-Vented Rubber-Locking KeeperPlease note that most straps have a taper; the buckle dimension must match the buckle end of the strap, not the side where it attaches to the watch.
Apple Watch Strap Adaptors for 38mm, 40mm, 41mm, 42mm
from £7.00
Stainless steel adaptors that let you install any standard 20mm and 22mm watch strap on your 38mm, 40mm, 41mm, or 42mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set.
Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width.
Strap not included — can be added with purchase.
Apple Watch Strap Adaptors for 44mm, 45mm, 46mm, 49mm
from £7.00
Stainless steel adaptors that let you install any standard 22mm or 24mm watch strap on your 44mm, 45mm, 46mm, or 49mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set.
Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width.
Strap not included — can be added with purchase.
Custom Color Kits
£7.00
Six replacement keepers for Ridge FKM rubber watch straps in black, blue, red, orange, white, and yellow. Add one or two accent colors to your strap to match your watch dial, second hand, brand logo, or favorite team colors.
Available for our Ridge Rubber and XL Ridge straps, add one (or two) of six accent colors to your strap to get the perfect match. Each kit includes Black, Blue, Red, Orange, White, and Yellow keepers.
You can match the keeper to the color of your second hand, brand logo, or other accents on your watch. Or create the colors of your favorite sports team or just your favorite colors.
This is something I've wanted to offer for a long time, and can't believe it took me this long to come up with a way to do it! - Nick
Replacement Pins for Spring-Loaded Deployant Buckles
£4.00
Occasionally people misplace the pins for their StrapHabit Spring-Loaded Deployant Buckles. Purchase a replacement here. Only the pins are included. To purchase a buckle, please visit the link above.
Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.
Spring-Loaded Deployant Buckles For CTS Straps
£23.00
StrapHabit spring-loaded deployant to fit your CTS strap.
Strong leaf springs keep the buckle secure on your wrist, but make it easy to open and close without fiddling with buttons that can be hard to close or accidentally pop open. This design also makes the deployant thinner and more comfortable than typical deployants.
Each side features two micro-adjust holes to ensure a perfect fit (four total). A hidden StrapHabit logo is laser-engraved inside the buckle.
16mm fits 18, 19, and 20mm StrapHabit CTS straps18mm fits 21 and 22mm StrapHabit CTS straps
8mm thick when folded
Let customers speak for us
Shop Replacement Watch Buckles, Clasps, and Hardware
StrapHabit's full lineup of replacement watch buckles, clasps, and hardware. Whether you're swapping a worn buckle, upgrading to a deployant clasp, or adapting a strap to fit your Apple Watch, this collection has the parts to keep your watches and straps wearable.
Stainless steel buckles are available in single-fold deployant, spring-loaded deployant, additional standard pin buckle, and titanium designs. Tool-less quick-adjust bracelet clasps let you fine-tune bracelet fit without removing links. Replacement pins for spring-loaded deployant buckles are available separately for repairs.
Apple Watch strap adaptors fit 38mm, 40mm, 41mm, and 42mm models in one set, with a separate set sized for 44mm, 45mm, 46mm, and 49mm models. These let you use any standard 22mm StrapHabit strap on your Apple Watch. Custom color kits are also available for personalizing strap hardware to match your setup.
The collection includes the Divecore x StrapHabit HP Black DLC buckle and Spring-Loaded Deployant Buckles for CTS straps for compatible product lines. Available in widths from 16mm to 22mm depending on style. Every StrapHabit product is backed by our lifetime guarantee.
