Search results for "prospex":

Cut-To-Size Smooth FKM Deployant Straps StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance.

FKM rubber two-piece watch strap with a vented design for airflow during workouts and hot weather. Available in 20mm and 22mm. Quick-release spring bars for tool-free strap changes in seconds. Two keepers, one with notches to hold it in place. Nine adjustment holes to fit a wide range of wrist sizes. These straps are not silicone. FKM rubber feels nearly as soft and flexible as silicone but is much stronger. Resistant to fuzz, cracking, odor, sweat, and water. They can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical resistance, and heat resistance.

Genuine rubber two-piece watch strap with quick-release springbars. Two keepers, one with notches to hold it in place. Nine adjustment holes mean that these straps should fit well on any size wrist. Available with silver, or black PVD buckles. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

StrapHabit Hook and Loop Single Pass straps use a quick-change pass-through design. The soft yet durable nylon features a ribbed design and is secured with a hook-and-loop closure. This passes through the brushed stainless-steel hardware with a subtly engraved StrapHabit logo. They will fit wrists from about 5.75 to about 8 inches. These straps are designed to fit watches with traditional spring bars or fixed lug bars, such as the Tudor Pelagos FXD.

Genuine rubber two piece watch strap with quick release springbars. Available in 20mm and 22mm widths. Two floating keepers shaped to match the strap ridges. Eight adjustment holes mean that these straps should fit well on any size wrist. The end keeper features a tab to secure the end of the strap from moving around. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

We've released another bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. The TQ18 is now available in an all-brushed Oyster style. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with an 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. Standard clasps have three micro-adjust holes, and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts. They include free quick-release spring bars for easy, tool-free strap changes.

Micro-Adjust Deployant Clasp for Beads of Rice and Jubilee Bracelets Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp! The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism. Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close. These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes: Jubilee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch). Please read the fitment/specs information before purchasing

Stainless steel Jubilee bracelet with alternating brushed and polished links. Available in 20mm, 21mm, and 22mm. The thin, rounded link design sits comfortably on the wrist and pairs well with dive watches, chronographs, and many modern cases. Removable links for sizing. Each bracelet includes two quick-release spring bars in the correct diameter for your width, so there's no guesswork on fitment. Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.

FKM rubber pass-through military-style strap with adjustable keeper positions. Depending on your wrist size, you can configure it to fold over in the keepers or lay flat. The top surface of the strap has a ribbed design. This gives the look of a fabric strap while offering all the benefits of FKM rubber. The underside of the strap features diagonal venting to keep your wrist cool. A StrapHabit logo is molded in. The strap can also be reversed if you prefer the diagonal pattern on the outside. 17 adjustment holes mean these straps should fit any wrist size. The holes are closely spaced to get the perfect fit. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! These straps are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and less likely to pick up fuzz or crack. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance. They can be converted to single-pass by removing the spring bars from the dual-pass portion and swapping the keepers Multiple keeper positions allow the keeper positions to be fine-tuned for large and small wrists. This strap is also original equipment on all Nodus Nomad watches, and  WatchClicker named this the best strap for a sports watch.

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit FKM Rubber Quick Release Hybrid Watch Straps are made of genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. The attractive pattern molded into the rubber gives in a high-end appearance. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. If you're looking for a bracelet option, check out our TQ18 Bracelets!

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Beads of Rice Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with an 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 21mm where they meet the case. Then taper back to 18mm at the buckle. Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

You knew we would be back for 2026! To date, StrapHabit has donated over $75,000 to the American Cancer Society's Men Wear Pink campaign. With the help of Brodinkee, we've sold thousands of watch straps and donated the ENTIRE proceeds! This doesn't even include the over $60k donated by Long Island Watch last year through sales of the Islander MWP. We've done rubber and sailcloth straps in tang buckle and deployant formats, so this year we wanted to do something totally different. StrapHabit's Hook and Loop Single Pass straps have been one of our hottest straps of 2026, and seemed like the perfect platform for MWP. For each strap sold, the entire $34 will be donated to MWP We started with the same quick-change pass-through design. We wanted to color-match the hook-and-loop material, so we got the brightest pink material that we could find and dyed the straps to match. A black stripe straight down the middle adds some attitude to the pink color. For those who want to support Men Wear Pink but wanted something a bit more subdued, we added a second color for 2026. We took our Smoke Gray color from the standard model, swapped out the dark gray center strap for the same hot pink, and added a color-matched gray hook-and-loop material. Can't decide which color you like best? A Two-Pack will include one pink/black and one gray/pink in your selected size (20mm or 22mm). The soft yet durable nylon features a ribbed design and is secured with a hook-and-loop closure. This passes through the brushed stainless-steel hardware with a subtly engraved StrapHabit logo. They will fit wrists from about 5.75 to about 8 inches. These straps are designed to fit watches with traditional spring bars or fixed lug bars such as the Tudor Pelagos FXD. Because the full purchase price is donated to charity, discounts, and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code.

Genuine rubber two-piece quick-release watch strap. Available in 20mm, 22mm lug widths. Two floating keepers shaped to match the strap profile. Ten adjustment holes mean that these straps should fit well on any size wrist. Our StrapHabit Rubber straps are extremely durable, and comfortable.  The quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. They can be completely folded, twisted, and bent without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

StrapHabit brings you watch straps crafted from Chromexcel leather sourced at the Chicago-based Horween tannery. Chromexcel is widely regarded as a top choice of leather for a watch strap. It offers supreme durability, yet feels exceptionally soft and supple to the touch, almost buttery-smooth. The straps are padded, but still quite flexible. These straps also deliver a character that improves with age. Chromexcel's vegetable tanning process uses a proprietary blend of oils and waxes to create a naturally water-resistant surface that develops a rich patina over time. The oils provide comfort while resisting cracking and premature wear, and also add a unique personality to your timepiece. The result is a "pull-up" effect that shifts colors as the strap is folded or flexed. Minor scratches can also be rubbed off thanks to this effect. A water-resistant leather lining is applied to keep the strap soft against your wrist. The Horween and StrapHabit logos are embossed, as is the strap size. A high-quality stainless steel buckle features a brushed finish and attractive grooves.

Leather two-piece watch strap with quick-release spring bars. A pebbled pattern is embossed on the leather, making the strap more durable and scratch-resistant. It also gives it an attractive appearance. The result is the look and durability benefits of French Epsom leather at a more affordable price. The leather features beautiful, saturated colors with a satin finish. These straps are not stiff or uncomfortable and quickly shape to your wrist. The inner lining that touches your wrist is comfortable and soft top-grain leather. Ivory white stitching provides an attractive contrast. One fixed and one floating keeper. Our StrapHabit leather straps are durable, and look fantastic! The quick-release spring bars allow you to swap straps in seconds without tools quickly.