Find anything you need
Item added to cart!
%title%
%variant%
You have %itemCount% in your cart.Total being %total%
Spare Tips for Premium Bracelet Tool
from $29.00
Replace the tips for your StrapHabit Premium Bracelet Tool, or have a spare set.
Includes a pair of 1.0mm and 1.2mm tips, and a screwdriver to install them on your bracelet tool. The 1.0mm tip handles most standard watch bracelets, while the 1.2mm tip fits bracelets with wider pin holes. Both tips are stainless steel and designed to match the durability of the original tool.
If your tips have dulled or bent from regular use, swapping them out takes less than a minute with the included screwdriver.
Spring Bar Removal Tool for Watch Strap Changing
$12.00
Spring bar removal tool for changing watch straps and bands.
Most StrapHabit straps have quick-release spring bars, but a tool is typically required to remove your original watch strap or bracelet and a few of our styles that use standard spring bars.
Dual-tip design with a fork end and a pin end. The fork removes standard spring bars from between the lugs. The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs.
Built-in ruler in centimeters and millimeters for measuring lug width or strap size. StrapHabit branding is laser etched into the tool.
Spring-Loaded Deployant Buckles
from $42.00
Please read the fitment information on the Specifications tab before purchasing.
StrapHabit spring-loaded deployant buckles are the perfect upgrade to your StrapHabit or other straps.
Strong leaf springs keep the buckle secure while it's on your wrist, but make it easy to open and close without fiddling with buttons that can be difficult to close, or pop open by accident.
This design also makes the deployant thinner and more comfortable than typical deployants.
It also reduces wear and tear on the holes of your factory strap.
A StrapHabit logo is laser-engraved on the buckle.
Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.
If you've misplaced a pin and need replacements, they can be purchased here.
Spring-Loaded Deployant Buckles For CTS Straps
from $42.00
Deployant Clasp for StrapHabit Cut-to-Size (CTS) Rubber Straps
StrapHabit spring-loaded deployant to fit your Cut-to-Size strap.
Strong leaf springs keep the buckle secure on your wrist, but make it easy to open and close without fiddling with buttons that can be hard to close or accidentally pop open. This design also makes the deployant thinner and more comfortable than typical deployants.
Two micro-adjust holes on each side to fine-tune the fit (four total). A hidden StrapHabit logo is laser-engraved inside the buckle.
16mm fits 18, 19, and 20mm StrapHabit CTS straps18mm fits 21 and 22mm StrapHabit CTS straps
8mm thick when folded
STANDARD H x StrapHabit Watch Straps
from $35.00
StrapHabit and STANDARD H first crossed paths at Windup NY in 2022. Wesley threw out the idea of collaborating on a watch strap, but neither of us had just the right idea. We've regularly kept in touch ever since then and Nick was even a guest on The STANDARD H Podcast.
Wesley recently started the Instagram page @taupestrapclub, and we decided that color would be perfect for collaboration! Now we've added a versatile black option as well.
STANDARD H describes its apparel as "elevated basics." With that in mind, we developed an elevated basic watch strap. What better than a simple and durable military-style pass-through?
To signify the meeting of both brands, a subtle "SH" is laser engraved on the buckle.
A small batch of 20mm straps sold out in one day on the STANDARD H website (and was even featured on Hodinkee). We decided to produce another run in 20mm and 22mm, and offer them on both sites.
Standard Spring Bars
$6.00
Standard size spring bars with 0.8mm tips, 1.8mm thick in the center. These fit almost all watches with standard lugs in the width you select, available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm. Each pack includes two spring bars.
If you have a Seiko that needs 1.1mm tips, use our Seiko spring bars instead.
These also work with several StrapHabit straps, including Elastic, Seatbelt, Adjustable, Beads of Rice bracelets, and the Standard H x StrapHabit Pass-Through.
StrapHabit Gift Cards
from $14.48
Do you have a watch lover in your life, but don't know what to give them as a gift? Maybe they love our watch bands, but you don't know what sizes or colors they need.
A StrapHabit gift card is the perfect gift! Available in multiple denominations, they are the perfect gift.
Once you complete your order, you or the recipient will receive an email with the unique gift card code. The recipient can then use that code at checkout to redeem it.
StrapHabit Watch Collector Pins
from $8.00
Why did I make these? Because it's fun! Choose a lapel pin styled after one of my favorite watches. Can't decide? Get a 4 pack!
Pin them to your backpack, hat, watch case, or anywhere you want to show you're a watch lover.
Each pin features a gloss-coated offset printing in bright colors. They are solid metal, with a metal butterfly/military clutch securing the back.
TGN Sticker Pack
$8.00
Includes three stickers celebrating 10 years of the TGN podcast, your favorite podcast for travel, diving, driving, gear, and, most certainly, watches.
A sticker pack is also included with a 2 Pack of TGN straps.
TGN x StrapHabit Dazzle Camo Watch Straps
from $51.00
Your favorite podcast for travel, diving, driving, gear, and, most certainly, watches has teamed up with StrapHabit!
The all-new TGN x StrapHabit Dazzle Camo Watch Strap is constructed from durable nylon in a military-style dual-pass-through design with a printed orange TGN Dazzle Camo pattern.
The strap celebrates 10 years of the TGN podcast with "TGN10" embedded in the camo pattern. You'll find this hidden inside the strap. You'll also find the TGN logo laser-engraved on the buckle and the StrapHabit logo on one of the keepers.
It's a traditional 3-keeper, dual-pass design, but it will work perfectly with a James Stacey mod, making it a single-pass strap.
TGN straps are excluded from B4G1.
If you select a 2-Pack, you will receive a 20mm and 22mm strap with silver hardware, plus a sticker pack.
I've been a listener of TGN for years, and have always been a huge fan of the hosts, James Stacey and Jason Heaton. James is also well-known as Hodinkee's editor-in-chief, while Jason is an accomplished author and Hodinkee editor. I recently joined their Slack channel after users were discussing the Standard H straps and found it to be an amazing community. When I started hearing of demand for a TGN edition strap, I jumped at the chance to support it.
I worked with the TGN team to develop this strap using TGN's popular Dazzle Camo pattern. Also known as "razzle dazzle," this pattern originated as a form of WWI ship camouflage. Unlike other forms of camouflage, the intention of dazzle is not to conceal but to make it difficult to estimate a target's range, speed, and heading. I can't verify if it's effective, but it sure looks cool on a watch strap!
-Nick
The Bond Experience x StrapHabit Seat Belt Watch Straps
$51.00
This strap is a fun play on the iconic watch strap worn by your favorite British spy. It features 9 stripes, with colors updated to navy blue, orange, and red.
Available in 20mm, the strap is made from seatbelt material and is sure to be soft and durable.
This project came about when James Lamdin of Analog Shift sent us a special request for a friend. David from The Bond Experience needed some watch straps! If you're not already familiar, TBE is a multifaceted online channel that has the largest audience of 007 enthusiasts in the world.
StrapHabit loves these kinds of partnerships, so we produced a small batch to his specifications and Pantone colors. The design was so cool that we asked if we could make a few extra to offer to StrapHabit's followers. David graciously agreed!
This model uses a traditional military dual-pass design with three brushed silver stainless steel keepers. This keeps the watch very secure and allows the strap to be swapped without removing the spring bars. The buckle features a subtle laser-engraved StrapHabit logo.
Thin Spring Bars for Seiko and Citizen Fat Lug Holes
$14.00
Spring bars with 1.1mm tips that are 1.8mm thick in the center, allowing fat tip spring bars to be installed in standard straps.
Includes 2 spring bars.
While all our straps fit safely and securely on Seiko and Citizen watches with fat lug holes, such as Prospex and Promaster models, some customers prefer not to have the slight wiggle when installing them on Seiko and Citizen Prospex and Promaster divers. The quick-release spring bars standard in our straps feature 0.8mm tips, while Seiko and Citizen divers' spring bars use 1.1mm tips.
Most fat spring bars can't be installed in standard straps, as they are too thick to fit.
This is why we've developed a new spring bar! It has 1.1mm tips but is 1.8mm at the center. This lets you install it in StrapHabit straps and Stainless Steel bracelets, as well as any of your other favorite straps.
These will work with any of our straps, but some of them will require stretching the rubber or breaking the tip off the QR spring bar.
Three Watch Travel Cases
from $63.00
Hard-Shell Watch Travel Case That Holds Three Watches
A hard-shell travel and storage case that holds three watches, designed for daily wearers who travel with more than one watch in rotation.
Unlike other travel cases that require your watch to lie flat, these can hold any type of watch or bracelet. This means that watches with inflexible integrated straps will fit, and it eliminates the risk of scratching your caseback or creating a crease in your watch straps.
These cases feature a hard-shell construction to protect your watch from compression while inside your backpack or luggage.
A soft lining keeps your watch's finish safe and secure inside the travel case, and the snaps are mounted on the shell's exterior, so they can't contact your watch. Each watch wraps around a soft insert that is also secured to the sectional dividers with snaps.
A debossed StrapHabit logo pull completes the look, ensuring your watches look great even when in storage.
Pick up an extra to store your watch straps while traveling so everything stays organized in one place.
Titanium Watch Buckles
$22.00
Replacement titanium watch buckles made from grade 2 titanium with a matte finish. Titanium is significantly lighter than stainless steel, corrosion resistant, and hypoallergenic.
Buckles with 2mm tangs fit:-Tropical Rubber-Horween Leather-Premium Sailcloth-Waffle Rubber-Epsom Leather-Slim RidgeBuckles with 3mm tangs fit:-Ridge Rubber-Extra Long-Smooth Rubber-Rubber and Sailcloth Hybrid Straps-Vented Rubber-Locking KeeperPlease note that most straps have a taper; the buckle dimension must match the buckle end of the strap, not the side where it attaches to the watch.
Tool-Less Quick Adjust Bracelet Clasps
from $50.00
Micro-Adjust Deployant Clasp for Beads of Rice and Jubilee Bracelets
Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp!
The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism.
Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close.
These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes:
Jubilee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp
Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).
Please read the fitment/specs information before purchasing
TQ18 Q Timex Replacement Beads of Rice Quick Release Watch Bracelets
from $71.00
After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here.
One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Beads of Rice Quick Release Watch Bracelets come in!
These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap.
These straps will also fit certain Casio models and other watches with an 18mm lug width. See the fitment guide below.
StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 21mm where they meet the case. Then taper back to 18mm at the buckle.
Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.
They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons.
They include free quick-release spring bars for easy, tool-free strap changes.
TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets
from $71.00
After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here.
One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in!
These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap.
These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below.
StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle.
They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons.
Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.
They include free quick-release spring bars for easy, tool-free strap changes.
TQ18 Q Timex Replacement Oyster Style Quick Release Watch Bracelets
from $71.00
We've released another bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. The TQ18 is now available in an all-brushed Oyster style.
One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Oyster Style Quick Release Watch Bracelets come in!
These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap.
These straps will also fit certain Casio models and other watches with an 18mm lug width. See the fitment guide below.
StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle.
They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons.
Standard clasps have three micro-adjust holes, and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.
They include free quick-release spring bars for easy, tool-free strap changes.
TQ18 Q Timex Replacement Watch Straps - FKM Rubber Quick Release Watch Bands
$56.00
Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here.
One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in!
These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap.
These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below.
StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case.
StrapHabit FKM Rubber Quick Release Hybrid Watch Straps are made of genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.
FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free.
The attractive pattern molded into the rubber gives in a high-end appearance.
They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper. Thirteen adjustment holes mean that these straps should fit well on any size wrist.
If you're looking for a bracelet option, check out our TQ18 Bracelets!
Tropical Retro Style FKM Rubber Quick Release Watch Straps
from $50.00
FKM rubber two-piece watch strap with quick release springbars. Available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm lug widths. Two floating keepers secure the tail end of the strap. Small ridges on the side of the strap help to secure them. Thirteen adjustment holes mean that these straps should fit well on any size wrist.
The underside of the strap features a waffle pattern, and a number of holes allow for venting of the wrist.
Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools.
These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking.
Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.
Let customers speak for us
