18mm Watch Straps

FKM rubber two-piece watch strap with quick release springbars. Available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm lug widths. Two floating keepers secure the tail end of the strap. Small ridges on the side of the strap help to secure them. Thirteen adjustment holes mean that these straps should fit well on any size wrist. The underside of the strap features a waffle pattern, and a number of holes allow for venting of the wrist. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Sailcloth style two-piece watch strap with quick-release springbars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off.The outer material is recycled PET woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that touches your wrist is comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. A brushed silver deployant buckle is included with each strap. Nine tightly-spaced adjustment holes mean these straps will fit well on any wrist around 5.75 to 8.25 inches, and can be finely adjusted to get the perfect fit. Our StrapHabit sailcloth straps are extremely durable, and look fantastic! The quick-release springbars allow you to quickly swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes with the buckle close to the center of your wrist. Also includes a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

Nylon webbing combined with comfortably stretch elastic and a hook and loop closure. The length of the hook and loop side is 130mm when fully extended. When folded, it can adjust from about 78 to 95mm. The buckle side also includes three pieces in 15mm increments. Fits wrists from about 5.75 to about 8.25 inches.

Please read the fitment/specs information before purchasing Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp! The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism. Twin trigger buttons keep the clasp securely in place. These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes: Juiblee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).

Our StrapHabit Classic Beads of Rice Watch Bracelets are some of the most comfortable and stylish bracelets available! Due to the thin, rounded links, they are very comfortable on the wrist. They will pair perfectly with your vintage dive watch, chronograph, or many modern watches. They are made of stainless steel with removable links. The clasp is deployant with a safety latch and dual push buttons. Don't you hate buying a bracelet to receive it and find out that your existing spring bars don't fit? Don't worry, each of our bracelets includes two of the correct diameter spring bars!

Genuine rubber two-piece watch strap with quick-release springbars. Two keepers, one with notches to hold it in place. Nine adjustment holes mean that these straps should fit well on any size wrist. Available with silver, or black PVD buckles. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

UPDATE: If your size is sold out, please see the Rubber MWP straps Brodinkee and StrapHabit are back for 2025 with our best collaboration yet! StrapHabit has already donated over $50,000 to the American Cancer Society since 2022 through the sales of Men Wear Pink watch straps. Update! We raised an additional $25,000 in 2025! Show your support for a friend or loved one who has battled cancer right on your wrist! StrapHabit will donate the total purchase cost ($49) for each strap sold to the fundraiser. Because the full purchase price is donated to charity, discounts and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. These straps feature the same design as our best-selling Deployant Sailcloth, but are now available in our brightest pink color yet! Black stitching helps to accentuate the design, and a StrapHabit/Brodinkee logo is discreetly hidden on the inside of the clasp. A brushed silver deployant buckle is included with each strap. Black is available as an add-on item. Sailcloth-style two-piece watch strap with quick-release spring bars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is made from recycled PET and woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that comes into contact with your wrist is made of comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. Nine tightly spaced adjustment holes mean these straps will fit nicely on any wrist measuring 5.75 to 8.25 inches, and can be finely adjusted to achieve the perfect fit. The quick-release springbars allow you to swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes, with the buckle close to the center of your wrist. Also consists of a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Beads of Rice Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 21mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

Please read the fitment information on the Specifications tab before purchasing.  StrapHabit spring-loaded deployant buckles are the perfect upgrade to your StrapHabit or other straps.  Strong leaf springs keep the buckle secure while it's on your wrist, but make it easy to open and close without fiddling with buttons that can be difficult to close, or pop open by accident.  This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap.  A StrapHabit logo is laser-engraved on the buckle.  Requires two small screwdrivers to install. Our mini screwdriver kit works perfectly.  If you've misplaced a pin and need replacements, they can be purchased here.

Replacement stainless steel watch buckles for straps with 18mm, 20mm and 22mm buckle width. Includes spring bars. Available in brushed silver, and black PVD. Standard buckles are the same as the ones that come with our original Sailcloth Quick Release straps. Standard 2 buckles are the same ones that come with our Waffle, Slim Ridge, Horween, and Epsom Style Leather Straps. Dive buckles are the same as the ones that come with most of our Rubber Quick Release straps. These are available with and without StrapHabit engraving. These fit Ridge, Smooth, Vented, Locking Keeper, and TQ18 straps. Premium buckles are the same as the ones that come with our Premium Sailcloth Quick Release straps. They include StrapHabit engraving. Pro Diver buckles are the same as the ones that come with our Pro Diver straps. They include StrapHabit engraving. Tropical buckles are the same as the ones that come with our Tropical Quick Release straps. They include StrapHabit engraving.

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit FKM Rubber Quick Release Hybrid Watch Straps are made of genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. The attractive pattern molded into the rubber gives in a high-end appearance. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. If you're looking for a bracelet option, check out our TQ18 Bracelets!

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit Leather and FKM Rubber Quick Release Hybrid Watch Straps combine the best elements of two of our most popular styles of watch straps. They feature the high-end appearance of our leather straps combined with the numerous benefits of our FKM rubber straps. The leather is genuine calfskin, which is soft to the touch, and high-end in appearance. It also has an Epsom pattern embossed, similar to our standard leather straps. The inner FKM surface features channels to cool the wrist, and attractive StrapHabit branding molded in. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. The inner lining is genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. If you're looking for a bracelet option, check out our TQ18 Bracelets!

Replacement titanium watch buckles made from grade 2 titanium with a matte finish. Buckles with 2mm tangs fit:-Tropical Rubber-Horween Leather-Premium Sailcloth-Waffle Rubber-Epsom Leather-Slim RidgeBuckles with 3mm tangs fit:-Ridge Rubber-Extra Long-Smooth Rubber-Rubber and Sailcloth Hybrid Straps-Vented Rubber-Locking KeeperPlease note that most straps have a taper; the buckle dimension must match the buckle end of the strap, not the side where it attaches to the watch.