What's New

StrapHabit brings you the Imperial Watch Co. Slidecatch tool. This tool is so useful and just plain cool that we had to offer it on the StrapHabit site. The Slidecatch is the first Titanium Everyday Carry (EDC) tool to feature custom precision bit watch tools! It is perfect for doers, makers, builders, and yes, even watch enthusiasts. The Slidecatch combines the elements of a portable screwdriver with the sleekness and fun of a retractable blade! Stunningly slim, portable, and just downright a blast to use. Utilitarian at its core, this all-Titanium tool accepts standard 4mm hex bits so you can carry exactly what you need, when you need it. Whether you’re looking for a pocket-ready tool for tuning your camera gear, adjusting the brakes on your mountain bike, or a spring bar tool for swapping out watch bands, the Slidecatch has you covered! This model features a grey all-Titanium body that epitomizes form meets function. From a visually striking appearance to its ergonomic size and top-of-the-line materials, the Slidecatch is one tool you’ll never want to leave home without.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

StrapHabit has teamed up with Anti Watch, Watch Club, to create a strap! It's constructed of durable nylon, with the club's topographical pattern printed on it. The gray, black, and red colorway is intended to match the club colors as well as pair perfectly with the Jack Mason, Nodus, and Vertex club watches. One-piece stainless steel buckles and hardware, without spring bars, are designed to withstand the club's "use your shit" mantra. I first met some of the guys from AWWC at Windup NY several years ago and really appreciated what they do. The group's mission is to provide support to veterans and first responders through monetary, social, humanitarian, and emotional assistance. For each strap sold, the entire $35 cost will be donated to AWWC. Because of this, discounts and B4G1 are not available for the AWWC straps. Despite the name, the group is made up of some hardcore watch enthusiasts. They aren't anti-watch, but rather against the idea that a watch is something to be babied and protected. They are a group of genuine and hardworking individuals, which is why StrapHabit wanted to get involved, at least in a small way. AWWC works closely with various military, medical, and law enforcement personnel to develop specialized products tailored to their needs and sells these products through the AWWC website via limited drops. The group is non-profit and is run by a team of professionals who work full-time and volunteer to support the club during off-hours. If you'd like to learn more, visit the Anti Watch, Watch Club's website.

Brodinkee and StrapHabit are back for 2025 with our best collaboration yet! StrapHabit has already donated over $50,000 to the American Cancer Society since 2022 through the sales of Men Wear Pink watch straps. Show your support for a friend or loved one who has battled cancer right on your wrist!   StrapHabit will donate the total purchase cost ($49) for each strap sold to the fundraiser. Because the full purchase price is donated to charity, discounts and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. These straps feature the same design as our best-selling Deployant Sailcloth, but are now available in our brightest pink color yet! Black stitching helps to accentuate the design, and a StrapHabit/Brodinkee logo is discreetly hidden on the inside of the clasp. A brushed silver deployant buckle is included with each strap. Black is available as an add-on item. Sailcloth-style two-piece watch strap with quick-release spring bars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is made from recycled PET and woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that comes into contact with your wrist is made of comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. Nine tightly spaced adjustment holes mean these straps will fit nicely on any wrist measuring 5.75 to 8.25 inches, and can be finely adjusted to achieve the perfect fit. The quick-release springbars allow you to swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes, with the buckle close to the center of your wrist. Also consists of a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

StrapHabit has teamed up with Divecore to bring you your favorite professional dive strap to StrapHabit's loyal customers! These use Divecore's upgraded HP design with a StrapHabit branded buckle and packaging. Divecore straps are not eligible for B4G1. The Divecore HP is the premium and heavily upgraded version of the original Vortex diving watch strap. These straps are 80/127mm long, 4mm thick, and have with a 2mm taper from springbar to buckle. It features curved edges, added vented holes, and refinement of the signature Mono-accordion design for flexibility. Includes Divecore proprietary 2.5mm thick quick-release spring-bars with a standard size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps. Divecore's signature mono-accordion design for flexibility while avoiding obstructing the keeper from a perfect fit. Flat pin buckle and flat holes maximizing micro adjustments. Locking feature preventing the strap from opening in dynamic pressure environments. Stainless steel hardware. Yellow straps are part of Divecore's collaboration with Deepsea EDC, featuring a unique yellow color inspired by the iconic KM37 diving helmets. This collaboration also supports Project Recover, a nonprofit organization dedicated to locating and repatriating American service members missing in action since World War II. For each yellow strap sold, 5% of the proceeds will be donated to Project Recover to support their mission of bringing closure and recognition to the families and the nation. These use Divecore's upgraded American FKM rubber formula. The scientific name of FKM is Fluoro-Elastomer. It is an extremely hard-wearing rubber compound highly resistant to salt water, aggressive chemicals, and extreme temperatures (as low as -45C and high as +300C). It is the perfect choice for a high-end rubber watch strap designed to be fitted to the toughest watches and tackle the harshest environments.

StrapHabit Premium Quick Release Bracelets are some of the most comfortable and stylish bracelets available! Due to the thin, rounded links, they are very comfortable on the wrist. They will pair perfectly with your vintage dive watch, chronograph, or many modern watches. They are made of stainless steel with screwed, removable links. The clasp is deployant with a safety latch and dual push buttons. Don't you hate buying a bracelet, only to find out that your existing spring bars don't fit? Don't worry, each of our bracelets includes two of the correct diameter quick release spring bars!

Nylon webbing combined with comfortably stretch elastic and a hook and loop closure. The length of the hook and loop side is 130mm when fully extended. When folded, it can adjust from about 78 to 95mm. The buckle side also includes three pieces in 15mm increments. Fits wrists from about 5.75 to about 8.25 inches.

One of our most popular straps is now available for extra-large wrists! These will fit wrists from about 7.25 inches to 10.25 inches. Genuine FKM rubber two-piece watch strap with quick-release spring bars. Two floating keepers.  Fourteen adjustment holes mean that these straps should fit well on wrists of any size. If your wrist size is less than 8 inches, please check out the standard Ridge Rubber straps. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release springbars allow you to swap straps in seconds without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance.

Sailcloth style two-piece watch strap with quick-release springbars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off.The outer material is recycled PET woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that touches your wrist is comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. A brushed silver deployant buckle is included with each strap. Nine tightly-spaced adjustment holes mean these straps will fit well on any wrist around 5.75 to 8.25 inches, and can be finely adjusted to get the perfect fit. Our StrapHabit sailcloth straps are extremely durable, and look fantastic! The quick-release springbars allow you to quickly swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes with the buckle close to the center of your wrist. Also includes a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

Upgrade your HP strap with our Black DLC (Diamond-Like Carbon) Buckle, built for rugged performance and a stealth aesthetic that pairs perfectly with your dive watch. Crafted from high-grade stainless steel and finished with a black DLC coating, this buckle offers exceptional scratch resistance, corrosion protection, and a deep matte finish that won’t fade over time. Compatible with our HP series. 18mm buckles fit 20mm Divecore HP straps. 20mm buckles fit 22mm Divecore HP straps. Features: Black Diamond-Like Carbon (DLC) coating Scratch-resistant and corrosion-resistant finish Brushed matte texture for a stealthy, tactical look Solid stainless steel construction

Please read the fitment/specs information before purchasing Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp! The clasp features a toolless micro-adjustment that provides 17mm of extension with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism. Twin trigger buttons keep the clasp securely in place. These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). Fitment guide: Juiblee - All sizes require 18mm claspsTQ18 Jubilee- 18mm claspBeads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Beads of Rice - 18mm clasp Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch).

StrapHabit Premium Spring Bar Tool for changing watch straps and bands. Compared to your standard Spring Bar Tool, this Premium features the following upgrades: -Longer body with knurled surface for easier grip while removing difficult spring bars-Locking collars to secure tips from loosening-Two sizes of forks for removing straps with more clearance, and tight fit bracelets-Reversible tip with a small pin The standard tool is a lower cost option recommended for occasional strap swaps, while this premium tool is an easier to use option for those who swap straps and bracelets frequently. While most StrapHabit straps have quick-release spring bars, a tool is typically required to remove or install your old watch strap/bracelet and a few of our straps.  The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs.  StrapHabit branding is laser etched in the tool.

Please read the fitment/specs information before purchasing -->  StrapHabit single-fold deployant buckles are the perfect upgrade to your StrapHabit or other straps.  Twin trigger buttons keep them secure. This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle.

Our StrapHabit Jubilee Bracelets are some of the most comfortable and stylish bracelets available! Due to the thin, rounded links, they are very comfortable on the wrist. They will pair perfectly with your vintage dive watch, chronograph, or many modern watches. They are made of stainless steel with removable links. The clasp is deployant with a safety latch and dual push buttons. Don't you hate buying a bracelet to receive it and find out that your existing spring bars don't fit? Don't worry, each of our bracelets includes two of the correct diameter spring bars!

StrapHabit adaptors to install standard straps on your 44mm, 45mm, 46mm & 49mm Apple Watch. Compatible with 20mm and  22mm StrapHabit straps. Choose from the add-ons above the add to cart button for the best fit. *Strap not included, can be added with purchase.

StrapHabit adaptors to install standard straps on your 44mm, 45mm, 46mm & 49mm Apple Watch. Compatible with 22mm and 24mm StrapHabit straps. Choose from the add-ons above the add to cart button for the best fit. *Strap not included, can be added with purchase.

Curved spring bars with 0.8mm tips that are 1.5mm thick in the center. These provide more clearance to the case on watches with tight lug spacing.

Complete Your Watch to an even higher level with StrapHabit custom color kits.  Available for our Ridge Rubber straps, add one (or two) of six accent colors to your strap to get the perfect match. Each kit includes Black, Blue, Red, Orange, White, and Yellow keepers. You can match the keeper to the color of your second hand, brand logo, or other accents on your watch. Or create the colors of your favorite sports team or just your favorite colors. This is something I've wanted to offer for a long time, and can't believe it took me this long to come up with a way to do it! - Nick