Best Sellers

FKM rubber two-piece watch strap with quick release springbars. Available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm lug widths. Two floating keepers secure the tail end of the strap. Small ridges on the side of the strap help to secure them. Thirteen adjustment holes mean that these straps should fit well on any size wrist. The underside of the strap features a waffle pattern, and a number of holes allow for venting of the wrist. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Genuine FKM rubber two piece watch strap with quick release springbars. Available in 20mm, 22mm, and 24mm lug widths. Two floating keepers.  Nine adjustment holes mean that these straps should fit well on wrists of any size. Available with silver or black PVD buckles. These straps fit wrists from about 6.25 to 8.25 inches. If your wrist size is 8 inches or larger, we reccommend the Extra Long Ridge Rubber strap. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release springbars allow you to swap straps in seconds without tools quickly. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance.

StrapHabit Hook and Loop Single Pass straps use a quick-change pass-through design. The soft yet durable nylon features a ribbed design and is secured with a hook-and-loop closure. This passes through the brushed stainless-steel hardware with a subtly engraved StrapHabit logo. They will fit wrists from about 5.75 to about 8.25 inches. These straps are designed to fit watches with traditional spring bars, or fixed lug bars such as the Tudor Pelagos FXD.

Military-Style Nylon Pass-Through Watch Strap The Blade HQ x StrapHabit Dessert Warrior Watch strap is constructed from durable nylon in a military-style dual-pass-through design. The official Dessert Warrior pattern is printed on the nylon. You'll find the Blade HQ logo laser-engraved on the buckle, and StrapHabit on one of the keepers. All of the hardware is PVD-coated in blue or pink, inspired by the blue and pink blades on the knives. So what are these things? Recently, photos of knives with a rainbow-sprinkle pattern and colored blades have been popping up on my social media feeds. The frosting pattern printed on a utilitarian tool was such a fun juxtaposition that I wanted to know more! The idea originated at popular knife seller Blade HQ, which sold a knife called the "Desert Warrior." People loved them, but autocorrect took over, and Blade HQ started receiving inquiries for the Dessert Warrior. The brand loves to have fun and decided to run with the funny error. It turned out to be even more popular than the original knives, with the knives often selling out upon release. As far as StrapHabit's involvement, it pays to have friends, as it was a collaborative effort across several channels. Random Rob first suggested the idea, which I thought was super fun! Rather than create a sprinkle pattern strap, I wanted to collaborate with the originators. I reached out to a long-time friend of StrapHabit, Levon of the Knife Nuts Podcast. He helped bridge the connection with Blade HQ, and the rest was history! -Nick

Sailcloth Watch Strap with Captured Tail Deployant Buckle Sailcloth style two-piece watch strap with quick-release springbars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is recycled PET woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that touches your wrist is comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. A brushed silver deployant buckle is included with each strap. Nine tightly-spaced adjustment holes mean these straps will fit well on any wrist around 5.75 to 8.25 inches, and can be finely adjusted to get the perfect fit. Our StrapHabit sailcloth straps are extremely durable, and look fantastic! The quick-release springbars allow you to quickly swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes with the buckle close to the center of your wrist. Also includes a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

One of our most popular straps is now available for extra-large wrists! These will fit wrists from about 7.25 inches to 10.25 inches. Genuine FKM rubber two-piece watch strap with quick-release spring bars. Two floating keepers.  Fourteen adjustment holes mean that these straps should fit well on wrists of any size. If your wrist size is less than 8 inches, please check out the standard Ridge Rubber straps. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release springbars allow you to swap straps in seconds without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance.

StrapHabit FKM rubber two-piece deployant watch strap with quick-release springbars. Available in 19mm, 20mm, 21mm, and 22mm lug widths. The deployant design means that the tail end of the strap is captured and will not flop around. A polished buckle with twin-triggers keeps your watch secure, but is quick to take on and off. A polished deployant buckle is included with each strap. Twelve tightly-spaced adjustment holes mean these straps will fit well on any wrist around 6 to 8.25 inches, and can be finely adjusted to get the right fit. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also molded in the FKM rubber. If you prefer supporting the American Cancer Society, check out the Brodinkee x StrapHabit Men Wear Pink version of this strap. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Sailcloth nylon two-piece watch strap with quick-release spring bars. One fixed and one floating keeper. These feature soft sailcloth fabric, leather reinforcement at the holes, and buckles with polished and brushed finishing Our StrapHabit sailcloth straps are extremely durable and look fantastic! The quick-release spring bars allow you to swap straps in seconds without tools. Includes a short (115mm) and long (125mm) tail strap. The outer material is nylon sailcloth. It is softer than canvas and has a slight shine. The material is strong but softens to fit your wrist after a short time. The inner lining that touches your wrist is comfortable, black synthetic leather. Breakfast Blue: This vibrant blue color is the perfect pairing for a brunch with friends.Lilacking: Despite its name, this colorway is not lacking in style, comfort, or durability!PSL (Pumpkin Strap Love): Fall is here! Pick up the perfect strap to wear while apple picking or carving a turkey.Stay Classy Burgundy: This strap smells of rich mahogany. Okay, not really, but it is leather-bound, and it's kind of a big deal. People know it!Panda: Like your favorite vintage chronograph, white with black inserts.Reverse Panda: We think you get it.pH Green: Porsche has Acid Green, but ours is a little more basic.Mars Red: The color of the fourth planet (and our favorite mission of the Moonswatch).I.M.E. Camo: "It Matches Everything." This camo has so many colors in it that it has to match some part of your watch.

StrapHabit Single Watch Travel Cases are the best way to keep your watch or straps safe while traveling! Unlike other travel cases that require your watch to lie flat, these can hold any type of watch or bracelet. This means that watches with inflexible integrated straps will fit, and it eliminates the risk of scratching your caseback or creating a crease in your watch straps. Also, unlike other solutions, these cases feature a hard-shell construction to protect your watch from compression while inside your backpack or luggage. Removable foam ensures a perfect fit for both small and large watches. A soft lining keeps your watch's finish safe and secure inside the travel case, and the zipper is mounted on the exterior of the hard shell, so it can't contact your watch. A StrapHabit zipper logo pull completes the look, ensuring your watches look great even when in storage. Be sure to pick up an extra one to store your watch straps while traveling, making it easy to prepare for any event!

Hybrid two-piece watch strap with a woven sailcloth top and FKM rubber underside. The sailcloth gives it a textured, refined look. The FKM rubber lining makes it waterproof, sweat-resistant, and resistant to fuzz, cracking, and odor. Available in 20mm and 22mm with silver or black PVD buckles. Quick-release spring bars for tool-free strap changes in seconds. Two keepers hold the end of the strap securely in place. Thirteen adjustment holes to fit a wide range of wrist sizes. The FKM rubber lining feels nearly as soft and flexible as silicone but is much stronger. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical resistance, and heat resistance. Anti-allergenic and scent-free.

Watch bracelet removal and installation tool, perfect for removing or installing your original watch bracelet, which likely does not include quick-release springbars. Many modern watches have tight tolerances, and removing or installing bracelets is challenging with standard springbar tools. This tool makes it easy to compress both sides of the springbar simultaneously, allowing the bracelet to slide out more easily. The tool is also spring-loaded to make lining it up easier. To reinstall, compress the springbars using the flat ends of the tool, and slide the bracelet back into the case. Includes a 1.0mm and 1.2mm tips, a screwdriver for swapping, and a padded carrying case. Featuring a printed measurement scale for precise alignment without scratching your lugs. Includes:-Premium bracelet tool-1.0mm tips for removing most springbars-1.2mm tips for removing larger springbars-Screwdriver for changing tips-Carrying case Minimum opening: 15mm Maximum opening: 27mm

Cut-To-Size Smooth FKM Deployant Straps StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance. Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting

Please read the fitment/specs information before purchasing --> Micro-Adjust Deployant Clasp for Beads of Rice and Jubilee Bracelets Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp! The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism. Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close. These buckles are designed to fit our Beads of Rice and Jubilee Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes: Jubilee - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 Jubilee- 18mm claspTQ18 Beads of Rice - 18mm clasp Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).

Nylon Pass-Through Charity Watch Strap for Cancer Research  By now, many of you know that a few months after the inception of StrapHabit, I learned that I had testicular cancer. Although I was very lucky that it was caught early, that experience shifted the way that I look at life and what I value most. Although it was a difficult time, it taught me that sharing my story with others is a powerful tool for raising awareness and money to help others. Unfortunately, in the years since then, I've seen more and more loved ones experience their own battles with cancer. In an effort to leverage the brand's reach to support those facing their own battles, StrapHabit has partnered with friends to support several charities. I've sold a lot of straps and raised a lot of money (around $75,000 as of mid 2026), but I haven't put any of my own sweat into it. I had a few local customers in Columbus, Ohio, call me out for not participating in Pelotonia, a massive annual bike ride that raises money for cancer research. When the ride added a mountain bike portion this year, I officially ran out of excuses. Mountain biking is my favorite sport, so I felt that I had to do it. My son's mountain bike group put together a team for parents, so I even have a great group of partners to practice with. As a result, on October 3rd, I'll be riding 24 trail miles, a distance I haven't ridden in years. I've been more focused on fitness since I started doing StrapHabit full-time, so I'm sure I can do it! And of course I'll be wearing one of these straps. For each strap sold, StrapHabit will donate $35 to Pelotonia. 100% of funds donated to Pelotonia go directly to innovative cancer research at the OSUCCC James Cancer Treatment and Research Center. -NickFounder, StrapHabit The strap is a nylon pass-through strap with amazing graphics designed by Matt Smith-Johnson (a.k.a. Teenage Grandpa).  It features a repeating pattern of the Pelotonia logo, creating a camouflage appearance. The logo is also reminiscent of a field watch arrow, but turned on its side. The Pelotonia name is hidden on the inside of the strap, and the buckle features subtle StrapHabit engraving. This is the same premium pass-through nylon strap we use in some of your other favorite StrapHabit collaborations, now featuring the Pelotonia arrow in a repeating, camouflage pattern. Discounts and sales do not apply to these charity straps, and they are excluded from B4G1. StrapHabit will donate $35 from each strap sold to Pelotonia. If you prefer to support my campaign directly, please visit https://my.pelotonia.org/profile/NL1335716.  If you select a 2-Pack, you will receive a 20mm and 22mm strap with silver hardware, plus a free Pelotonia sticker pack. The sticker packs are also available for purchase separately, with the proceeds also being donated.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

Please read the fitment/specs information before purchasing --> Twin-Trigger Deployant Clasp for Leather and Rubber Straps StrapHabit single-fold deployant buckles are an easy upgrade to your StrapHabit or other straps. Twin trigger buttons keep them secure. This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle.

Stainless steel Beads of Rice bracelet with thin, rounded links for a classic vintage look. The link shape sits comfortably on the wrist and pairs well with dive watches, chronographs, and many modern cases. Available in 18mm through 24mm. Removable links for sizing. Deployant clasp with a safety latch and dual push buttons. Each bracelet includes two quick-release spring bars in the correct diameter for your width, so there's no guesswork on fitment.

Standard size spring bars with 0.8mm tips, 1.8mm thick in the center. These fit almost all watches with standard lugs in the width you select, available in 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm. Each pack includes two spring bars. If you have a Seiko that needs 1.1mm tips, use our Seiko spring bars instead. These also work with several StrapHabit straps, including Elastic, Seatbelt, Adjustable, Beads of Rice bracelets, and the Standard H x StrapHabit Pass-Through.

Nylon webbing combined with comfortably stretch elastic and a hook and loop closure. The length of the hook and loop side is 130mm when fully extended. When folded, it can adjust from about 78 to 95mm. The buckle side also includes three pieces in 15mm increments. Fits wrists from about 5.75 to about 8.25 inches.

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit FKM Rubber Quick Release Hybrid Watch Straps are made of genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. The attractive pattern molded into the rubber gives in a high-end appearance. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. If you're looking for a bracelet option, check out our TQ18 Bracelets!