Search results for "Swatch":

Watch bracelet removal and installation tool, perfect for removing or installing your original watch bracelet, which likely does not include quick-release springbars. Many modern watches have tight tolerances, and removing or installing bracelets is challenging with standard springbar tools. This tool makes it easy to compress both sides of the springbar simultaneously, allowing the bracelet to slide out more easily. The tool is also spring-loaded to make lining it up easier. To reinstall, compress the springbars using the flat ends of the tool, and slide the bracelet back into the case. Includes a 1.0mm and 1.2mm tips, a screwdriver for swapping, and a padded carrying case. Featuring a printed measurement scale for precise alignment without scratching your lugs. Includes:-Premium bracelet tool-1.0mm tips for removing most springbars-1.2mm tips for removing larger springbars-Screwdriver for changing tips-Carrying case Minimum opening: 15mm Maximum opening: 27mm

StrapHabit Premium Quick Release Bracelets are some of the most comfortable and stylish bracelets available! Due to the thin, rounded links, they are very comfortable on the wrist. They will pair perfectly with your vintage dive watch, chronograph, or many modern watches. They are made of fully brushed stainless steel with screwed, removable links. The clasp is deployant with a safety latch and dual push buttons. Don't you hate buying a bracelet, only to find out that your existing spring bars don't fit? Don't worry, each of our bracelets includes two of the correct diameter quick-release spring bars!

Replacement titanium watch buckles made from grade 2 titanium with a matte finish. Titanium is significantly lighter than stainless steel, corrosion resistant, and hypoallergenic. Buckles with 2mm tangs fit:-Tropical Rubber-Horween Leather-Premium Sailcloth-Waffle Rubber-Epsom Leather-Slim RidgeBuckles with 3mm tangs fit:-Ridge Rubber-Extra Long-Smooth Rubber-Rubber and Sailcloth Hybrid Straps-Vented Rubber-Locking KeeperPlease note that most straps have a taper; the buckle dimension must match the buckle end of the strap, not the side where it attaches to the watch.

Standard size spring bars with 0.8mm tips that are 1.8mm thick in the center. These will fit almost all watches with standard lugs in the width listed.

Six replacement keepers for Ridge FKM rubber watch straps in black, blue, red, orange, white, and yellow. Add one or two accent colors to your strap to match your watch dial, second hand, brand logo, or favorite team colors. Available for our Ridge Rubber and XL Ridge straps, add one (or two) of six accent colors to your strap to get the perfect match. Each kit includes Black, Blue, Red, Orange, White, and Yellow keepers. You can match the keeper to the color of your second hand, brand logo, or other accents on your watch. Or create the colors of your favorite sports team or just your favorite colors. This is something I've wanted to offer for a long time, and can't believe it took me this long to come up with a way to do it! - Nick

Essential Watch Toolkit with Spring Bar Tool, Bracelet Sizer, and Travel Case Everything you need to swap straps, resize bracelets, and take care of your watch — bundled together at a better price than buying each piece separately. The spring bar removal tool handles quick strap changes. The bracelet link remover lets you size stainless steel bracelets at home without a jeweler. The mini screwdriver kit covers smaller adjustments and clasp screws. The UV lume charging flashlight is built to charge your watch dial before nighttime or to create dramatic lume shots. A watch travel case keeps everything protected on the go. A solid gift for any watch collector or a great way to build out your own toolkit in one purchase.

Curved spring bars with 0.8mm tips that are 1.5mm thick in the center. These provide more clearance to the case on watches with tight lug spacing. Standard spring bars sit straight across between the lugs, which can make strap changes difficult on watches where the lug openings sit close to the case. Curved spring bars arch away from the case, creating the extra room needed to slide a strap in and out without scratching or forcing it. These are a common need on watches with short lugs or factory-curved spring bars, such as Ming and similar models where the lugs curve inward toward the case back. Each set includes 2 spring bars. Available in 20mm, 22mm, and 24mm. We recommend pairing these with StrapHabit straps that have thinner edges for maximum clearance, including Ridge, Smooth, Vented, Slim Ridge, and Deployant Rubber straps. They also work well with single-pass styles like Elastic, Seatbelt, and FKM Rubber Pass Through straps.

Please read the fitment information below before purchasing.  StrapHabit single-fold deployant buckles are the perfect upgrade to your StrapHabit or other straps. Twin trigger buttons keep them secure. This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo with the Brodinkee B is laser engraved inside the buckle.

StrapHabit spring-loaded deployant to fit your CTS strap.  Strong leaf springs keep the buckle secure on your wrist, but make it easy to open and close without fiddling with buttons that can be hard to close or accidentally pop open. This design also makes the deployant thinner and more comfortable than typical deployants. Each side features two micro-adjust holes to ensure a perfect fit (four total). A hidden StrapHabit logo is laser-engraved inside the buckle. 16mm fits 18, 19, and 20mm StrapHabit CTS straps18mm fits 21 and 22mm StrapHabit CTS straps 8mm thick when folded

Stainless steel adaptors that let you install any standard 22mm or 24mm watch strap on your 44mm, 45mm, 46mm, or 49mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set. Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width. Strap not included — can be added with purchase.

Upgrade your Divecore HP or WFL strap with our Black DLC (Diamond-Like Carbon) Buckle, built for rugged performance and a stealth aesthetic that pairs perfectly with your dive watch. Crafted from high-grade stainless steel and finished with a black DLC coating, this buckle offers exceptional scratch resistance, corrosion protection, and a deep matte finish that won’t fade over time. 18mm buckles fit 20mm Divecore straps. 20mm buckles fit 22mm Divecore straps. Features:-Black Diamond-Like Carbon (DLC) coating-Scratch-resistant and corrosion-resistant finish-Brushed matte texture for a stealthy, tactical look-Solid stainless steel construction

Stainless steel adaptors that let you install any standard 20mm and 22mm watch strap on your 38mm, 40mm, 41mm, or 42mm Apple Watch. Slide the adaptors into your Apple Watch lugs, attach your strap using the spring bars that come with your StrapHabit strap, and you're set. Available in silver and black to match your Apple Watch case. Compatible with any StrapHabit two-piece strap in the matching width. Strap not included — can be added with purchase.

Strap Removal Tool for Blancpain x Swatch Scuba Fifty Fathoms Change the strap on your Blancpain x Swatch Scuba Fifty Fathoms with this StrapHabit hex screwdriver kit. Removes the strap bars on the Antarctic, Arctic, Indian, Atlantic, Pacific, and Ocean of Storms. Why you need it. Swatch installs the NATO straps on the Blancpain x Swatch Scuba Fifty Fathoms using screws rather than spring bars. Pass-through straps like our Elastic Straps or Adjustable Straps are easy and quick to swap in without any tools. For two-piece straps, two special hex drivers are required to remove the screw bars. StrapHabit has your back with a set of two gold anodized screwdrivers built exactly for this. What's included. A set of two gold anodized hex screwdrivers, CNC machined with spinning caps on the end to make them easy to hold and spin with one in each hand. Once the screw bars are removed, a two-piece strap can be installed. The lug width is 21.7mm so most 22mm rubber straps will fit. If your strap includes built-in quick-release spring bars (as StrapHabit straps do), the spring bars must first be removed. This is easy on our rubber straps by carefully stretching the rubber. On other straps, it requires cutting the spring bar and is more difficult. Pair with any StrapHabit two-piece rubber strap for the easiest swap.

Please read the fitment/specs information before purchasing -->  StrapHabit single-fold deployant buckles are the perfect upgrade to your StrapHabit or other straps.  Twin trigger buttons keep them secure. This design also makes the deployant thinner and more comfortable than typical deployants. It also reduces wear and tear on the holes of your factory strap. A StrapHabit logo is laser engraved inside the buckle.

Replace the tips for your StrapHabit Premium Bracelet Tool, or have a spare set. Includes a pair of 1.0mm and 1.2mm tips, and a screwdriver to install them on your bracelet tool. The 1.0mm tip handles most standard watch bracelets, while the 1.2mm tip fits bracelets with wider pin holes. Both tips are stainless steel and designed to match the durability of the original tool. If your tips have dulled or bent from regular use, swapping them out takes less than a minute with the included screwdriver.