Search results for "Swatch":

Genuine rubber two piece watch strap with quick release springbars. Available in 20mm and 22mm widths. Two floating keepers shaped to match the strap ridges. Eight adjustment holes mean that these straps should fit well on any size wrist. The end keeper features a tab to secure the end of the strap from moving around. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

FKM rubber pass-through military-style strap with adjustable keeper positions. Depending on your wrist size, you can configure it to fold over in the keepers or lay flat. The top surface of the strap has a ribbed design. This gives the look of a fabric strap while offering all the benefits of FKM rubber. The underside of the strap features diagonal venting to keep your wrist cool. A StrapHabit logo is molded in. The strap can also be reversed if you prefer the diagonal pattern on the outside. 17 adjustment holes mean these straps should fit any wrist size. The holes are closely spaced to get the perfect fit. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! These straps are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger and less likely to pick up fuzz or crack. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability and chemical and heat resistance. They can be converted to single-pass by removing the spring bars from the dual-pass portion and swapping the keepers Multiple keeper positions allow the keeper positions to be fine-tuned for large and small wrists. This strap is also original equipment on all Nodus Nomad watches, and  WatchClicker named this the best strap for a sports watch.

Nylon webbing combined with comfortably stretch elastic and a hook and loop closure. The length of the hook and loop side is 130mm when fully extended. When folded, it can adjust from about 78 to 95mm. The buckle side also includes three pieces in 15mm increments. Fits wrists from about 5.75 to about 8.25 inches.

Genuine rubber two-piece watch strap with quick-release springbars. Two keepers, one with notches to hold it in place. Nine adjustment holes mean that these straps should fit well on any size wrist. Available with silver, or black PVD buckles. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick-release springbars allow you to quickly swap straps in seconds without tools. These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible that they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.

Leather two-piece watch strap with quick-release spring bars. A pebbled pattern is embossed on the leather, making the strap more durable and scratch-resistant. It also gives it an attractive appearance. The result is the look and durability benefits of French Epsom leather at a more affordable price. The leather features beautiful, saturated colors with a satin finish. These straps are not stiff or uncomfortable and quickly shape to your wrist. The inner lining that touches your wrist is comfortable and soft top-grain leather. Ivory white stitching provides an attractive contrast. One fixed and one floating keeper. Our StrapHabit leather straps are durable, and look fantastic! The quick-release spring bars allow you to swap straps in seconds without tools quickly.

StrapHabit Single Watch Travel Cases are the best way to keep your watch or straps safe while traveling! Unlike other travel cases that require your watch to lie flat, these can hold any type of watch or bracelet. This means that watches with inflexible integrated straps will fit, and it eliminates the risk of scratching your caseback or creating a crease in your watch straps. Also, unlike other solutions, these cases feature a hard-shell construction to protect your watch from compression while inside your backpack or luggage. Removable foam ensures a perfect fit for both small and large watches. A soft lining keeps your watch's finish safe and secure inside the travel case, and the zipper is mounted on the exterior of the hard shell, so it can't contact your watch. A StrapHabit zipper logo pull completes the look, ensuring your watches look great even when in storage. Be sure to pick up an extra one to store your watch straps while traveling, making it easy to prepare for any event!

Genuine FKM rubber two-piece watch straps with quick release springbars. Available in 20mm and 22mm lug widths. Two floating keepers plus nine adjustment holes mean that these straps should fit well on any size wrist. Our StrapHabit Rubber straps are extremely durable, and comfortable. The deep colors look fantastic! Quick release springbars allow you to quickly swap straps in seconds without tools. Compared to our original Ridge and Smooth Rubber straps, these ones are thinner and have a mostly smooth underside. If you're looking for a thinner FKM rubber strap, these are the ones for you! These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, and chemical and heat resistance.

FKM rubber two-piece watch strap with a vented design for airflow during workouts and hot weather. Available in 20mm and 22mm. Quick-release spring bars for tool-free strap changes in seconds. Two keepers, one with notches to hold it in place. Nine adjustment holes to fit a wide range of wrist sizes. These straps are not silicone. FKM rubber feels nearly as soft and flexible as silicone but is much stronger. Resistant to fuzz, cracking, odor, sweat, and water. They can be completely folded without stretching or cracking. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical resistance, and heat resistance.

StrapHabit brings you watch straps crafted from Chromexcel leather sourced at the Chicago-based Horween tannery. Chromexcel is considered one of the best types of leather for a watch strap. It offers supreme durability, yet feels exceptionally soft and supple to the touch, almost buttery-smooth. The straps are padded, but still quite flexible. These straps also deliver a character that improves with age. Chromexcel's vegetable tanning process uses a proprietary blend of oils and waxes to create a naturally water-resistant surface that develops a rich patina over time. The oils provide comfort while resisting cracking and premature wear, and also add a unique personality to your timepiece. The result is a "pull-up" effect that shifts colors as the strap is folded or flexed. Minor scratches can also be rubbed off thanks to this effect. A water-resistant leather lining is applied to keep the strap soft against your wrist. The Horween and StrapHabit logos are embossed, as is the strap size. A high-quality stainless steel buckle features a brushed finish and attractive grooves.   This is StrapHabit's first Horween strap. If you do (or don't) choose to buy one, I'd love to hear your feedback. I'm not sure if these will become a standard item in the catalog yet, so if you want one, I'd recommend not waiting! -Nick

UPDATE: If your size is sold out, please see the Rubber MWP straps Brodinkee and StrapHabit are back for 2025 with our best collaboration yet! StrapHabit has already donated over $50,000 to the American Cancer Society since 2022 through the sales of Men Wear Pink watch straps. Update! We raised an additional $25,000 in 2025! Show your support for a friend or loved one who has battled cancer right on your wrist! StrapHabit will donate the total purchase cost ($49) for each strap sold to the fundraiser. Because the full purchase price is donated to charity, discounts and sales do not apply to these straps. These straps are not counted towards the B4G1 discount code. These straps feature the same design as our best-selling Deployant Sailcloth, but are now available in our brightest pink color yet! Black stitching helps to accentuate the design, and a StrapHabit/Brodinkee logo is discreetly hidden on the inside of the clasp. A brushed silver deployant buckle is included with each strap. Black is available as an add-on item. Sailcloth-style two-piece watch strap with quick-release spring bars. The deployant design means that the tail end of the strap is captured and will not flop around. A brushed steel buckle with twin triggers keeps your watch secure but is quick to take on and off. The outer material is made from recycled PET and woven in a sailcloth-style pattern. The material is strong but softens up to the shape of your wrist after wearing it for a short time. Compared to our Premium Sailcloth straps, it has a higher-quality feel. The inner lining that comes into contact with your wrist is made of comfortable and water-resistant synthetic leather. The strap also features a mild inner padding made from an additional layer of synthetic leather. Nine tightly spaced adjustment holes mean these straps will fit nicely on any wrist measuring 5.75 to 8.25 inches, and can be finely adjusted to achieve the perfect fit. The quick-release springbars allow you to swap straps in seconds without tools. Includes a 70mm and 90mm top strap to fit a wide range of wrist sizes, with the buckle close to the center of your wrist. Also consists of a 110mm tail piece to tuck under the top piece. A Spring Bar Tool will be required to swap the clasp to the longer or shorter strap.

After the popularity of our TQ18 straps, we've released a bracelet to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement Jubilee Quick Release Watch Bracelets come in! These are the perfect option for someone who loves their Q Timex but wants a more comfortable and higher-quality replacement for the original bracelet or strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's TQ18 replacement bracelets for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. Then taper back to 18mm at the buckle. They are made of stainless steel with split-pin removable links. The clasp is deployant with a safety latch and dual push buttons. They include free quick-release spring bars for easy, tool-free strap changes.

StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths. The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience. Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches. Need help sizing your strap? Check out the guide here! Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included. Additional buckles are also available here. 18mm, 19mm, and 20mm straps have 16mm buckles.  21mm and 22mm straps have 18mm buckles. The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber. Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools. These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance. Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting

Finally, a strap to fit Q Timex watches! You can check out all of our Q Timex straps here. One of the key aspects of the original Q Timex straps and bracelets is that they flare out to meet the case. Sure, you can install any 18mm lug-width strap, but it will look too narrow on a Q Timex. This is where StrapHabit's TQ18 Q Timex Replacement watch straps come in! These are the perfect option for someone who loves their Q Timex but wants a replacement for the original bracelet, or a more attractive and higher quality alternative to the rubber strap. These straps will also fit certain Casio models and other watches with 18mm lug width. See the fitment guide below. StrapHabit's new, exclusive TQ18 replacement straps for Q Timex fit the popular retro-style case perfectly. They are 18mm wide to fit the Q's narrow lugs but flare out to 22mm where they meet the case. StrapHabit Leather and FKM Rubber Quick Release Hybrid Watch Straps combine the best elements of two of our most popular styles of watch straps. They feature the high-end appearance of our leather straps combined with the numerous benefits of our FKM rubber straps. The leather is genuine calfskin, which is soft to the touch, and high-end in appearance. It also has an Epsom pattern embossed, similar to our standard leather straps. The inner FKM surface features channels to cool the wrist, and attractive StrapHabit branding molded in. They feature quick-release spring bars for easy, tool-free strap changes. Two keepers hold the end of the strap securely in place, with tabs to secure the first keeper.  Thirteen adjustment holes mean that these straps should fit well on any size wrist. The inner lining is genuine FKM rubber. They feel nearly as soft and flexible as silicone but are much stronger, and resistant to picking up fuzz or cracking, plus it is waterproof and sweat-proof.  FKM adds increased durability, chemical, and heat resistance compared to traditional vulcanized rubber. It is also anti-allergenic, and scent-free. If you're looking for a bracelet option, check out our TQ18 Bracelets!

StrapHabit has teamed up with Divecore to bring you your favorite professional dive strap to StrapHabit's loyal customers! These use Divecore's upgraded HP design, with a StrapHabit-branded buckle and packaging. Divecore straps are not eligible for B4G1. The Divecore HP is the premium and heavily upgraded version of the original Vortex diving watch strap. These straps are 80/127mm long, 4mm thick, and have a 2mm taper from springbar to buckle. It features curved edges, added vented holes, and refinement of the signature Mono-accordion design for flexibility. Includes Divecore's proprietary 2.5mm thick quick-release spring-bars with a standard size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps. Divecore's signature mono-accordion design for flexibility while avoiding obstruction of the keeper for a perfect fit. Flat pin buckle and flat holes maximize micro adjustments. A locking feature prevents the strap from opening under dynamic pressure. For another Divecore option, check out the WFL strap. Yellow straps are part of Divecore's collaboration with Deepsea EDC, featuring a unique yellow color inspired by the iconic KM37 diving helmets. This collaboration also supports Project Recover, a nonprofit organization dedicated to locating and repatriating American service members missing in action since World War II. For each yellow strap sold, 5% of proceeds will be donated to Project Recover to support its mission of bringing closure and recognition to families and the nation. These straps feature the EDC logo buckle and special packaging. Olive straps are part of the Divecore × Sketchy Boyz HP collaboration. This strap celebrates the ethos of Sketchy Boyz Watch Club — a multi-national community of military, law enforcement, and professional end-users who share their knowledge, experience, and passion for horology. Their mission is to provide honest, experience-based insight and create a space where end-users and enthusiasts alike can connect. These straps feature the Sketchy Boyz logo buckle and special packaging. These use Divecore's upgraded American FKM rubber formula. The scientific name of FKM is Fluoro-Elastomer. It is an extremely hard-wearing rubber compound highly resistant to salt water, aggressive chemicals, and extreme temperatures (as low as -45C and high as +300C). It is the perfect choice for a high-end rubber watch strap designed to fit the toughest watches and withstand the harshest environments.

Spring bar removal tool for changing watch straps and bands. Most StrapHabit straps have quick-release spring bars, but a tool is typically required to remove your original watch strap or bracelet and a few of our styles that use standard spring bars. Dual-tip design with a fork end and a pin end. The fork removes standard spring bars from between the lugs. The pin can also be used to change microadjust holes on a bracelet clasp and remove spring bars from watches with drilled lugs. Built-in ruler in centimeters and millimeters for measuring lug width or strap size. StrapHabit branding is laser etched into the tool.