Micro-Adjust Deployant Clasp for Beads of Rice and 5-Link Bracelets
Upgrade your StrapHabit Stainless Steel Bracelet or other favorite bracelet with a tool-less micro-adjust clasp!
The clasp features a toolless micro-adjustment that extends by 17mm with the push of two buttons. It also features 2mm of adjustment with two sets of micro-adjust holes. A hidden StrapHabit logo is laser-engraved on the inner hinge mechanism.
Twin trigger buttons keep the clasp securely in place. Please note that the black clasps require the buttons to be pressed to close.
These buckles are designed to fit our Beads of Rice and 5-Link Bracelets, but can be added to any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off of the width of the bracelet at the watch). They fit the following sizes:
5-Link - 18mm (fits 20-21mm bracelets), 20mm (fits 22mm bracelets)Beads of Rice - 18mm (fits 18-21mm bracelets), 20mm (fits 22mm bracelets), 22mm (fits 24mm bracelets)TQ18 5-Link- 18mm claspTQ18 Beads of Rice - 18mm clasp
Other bracelets: These will fit any bracelet with straight spring bars and the correct width *AT THE CLASP* (do not go off the width of the bracelet at the watch).
Please read the fitment/specs information before purchasing
StrapHabit FKM rubber two-piece deployant watch strap with quick-release springbars. Available in 19mm, 20mm, 21mm, and 22mm lug widths.
The deployant design means that the tail end of the strap is captured and will not flop around. A polished buckle with twin-triggers keeps your watch secure, but is quick to take on and off.
A polished deployant buckle is included with each strap.
Twelve tightly-spaced adjustment holes mean these straps will fit well on any wrist around 6 to 8.25 inches, and can be finely adjusted to get the right fit.
The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also molded in the FKM rubber.
If you prefer supporting the American Cancer Society, check out the Brodinkee x StrapHabit Men Wear Pink version of this strap.
These straps are NOT silicone, they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger, and resistant to picking up fuzz, or cracking. In the photos, you can see how flexible they are, and that they can be completely folded without stretching or cracking.
Compared to traditional vulcanized rubber, FKM adds increased durability, chemical and heat resistance.
Stainless steel Beads of Rice bracelet with thin, rounded links for a classic vintage look. The link shape sits comfortably on the wrist and pairs well with dive watches, chronographs, and many modern cases. Available in 18mm through 24mm.
Removable links for sizing. Deployant clasp with a safety latch and dual push buttons.
Each bracelet includes two quick-release spring bars in the correct diameter for your width, so there's no guesswork on fitment.
Standard clasps have three micro-adjust holes and require a small tool to adjust. Adding a quick-adjust clasp allows the bracelet to be adjusted on the fly as your wrist expands and contracts.
Cut-To-Size Smooth FKM Deployant Straps
StrapHabit FKM rubber two-piece dual butterfly deployant watch strap with quick-release springbars. Available in 18mm, 19mm, 20mm, 21mm, and 22mm widths.
The end of the strap sits inside the deployant to hide any rough edges after cutting and eliminate loose ends, creating a seamless look and wearing experience.
Twenty-four removable sections on the strap, plus 4 micro-adjust holes on the deployant, mean these straps can be adjusted to fit perfectly on any wrist around 5 to 9.5 inches.
Need help sizing your strap? Check out the guide here!
Important Installation Notes:-Measure carefully prior to cutting-Remove only one section at a time from one side at a time to avoid cutting too much-We recommend cutting the strap slightly loose and wearing it for a few days. Only make the final cut after you're sure it's needed.-Use the micro-adjust holes to make the strap smaller before cutting
Unless you have already purchased one of these straps, you must select a buckle color above the add to cart button. If you select None, a buckle will not be included.
Additional buckles are also available here.
18mm, 19mm, and 20mm straps have 16mm buckles.
21mm and 22mm straps have 18mm buckles.
The underside of the strap features a recess to keep your wrist cool. The size and a subtle StrapHabit logo are also in the FKM rubber.
Our StrapHabit Rubber straps are extremely durable and comfortable. The deep colors look fantastic! Quick-release spring bars let you swap straps in seconds, without tools.
These straps are NOT silicone; they are genuine FKM rubber. They feel nearly as soft and flexible as silicone, but are much stronger and less likely to pick up fuzz or crack. Compared to traditional vulcanized rubber, FKM adds increased durability, chemical, and heat resistance.
People have loved the Divecore HP Professional straps, so we were excited to work with Divecore to bring you its latest strap: the WFL (Waffle) Professional.
The WFL Strap is a purpose-built diving strap that blends the vintage character of a traditional waffle design with the technical upgrades and proven ergonomics of the HP model. The WFL retains all the essential features of the original while adopting a waffle-style structure for a more classic aesthetic.
Divecore straps are not eligible for B4G1.
These straps are 80/127mm long, 4mm thick, and have a 2mm taper from springbar to buckle. They feature curved edges, added vented holes, and a refined signature Mono-accordion design for flexibility.
Includes Divecore's proprietary 2.5mm-thick quick-release spring bars with a standard-size tip that will fit most watches. Seiko/Citizen fat spring bars can also be used with these straps.
Circular holes and a pin buckle for classic waffle aesthetics.
A locking feature prevents the strap from opening under dynamic pressure.
Stainless steel hardware.
Spare springbars are available here.
Made from Divecore's upgraded HNBR compound. Hydrogenated Nitrile-Butadiene Rubber (HNBR). HNBR is widely used in aerospace and automotive sealing applications due to its exceptional resistance to salt water, wet heat, and oil, as well as its superior tensile strength and wear resistance. Unlike conventional nitrile, HNBR is hydrogenated to stabilize the molecular structure, giving it outstanding durability, flexibility, and long-term resilience even in harsh marine environments.